Lakeside MagnaBox Assembly Instructions Manual
    |
A BDCEF GAD EThe Next Generation Professional Whelping BoxAssembly InstructionsParts List:A – Box Side Wall (x2)B – Box Rear WallC – Box Front WallD – Short Puppy Rail (x2)E – Long Puppy Rail (x2)F – 1/3 DoorG – 2/3 DoorSTEP 1:Find an open area, unpack the box (retain forfuture storage), and identify each of the parts asshown to the right. (Items D & E may appeardifferent based on the size of your whelping box.)Remove door items F & G from Front Wall (C).STEP 2: - Skip to Step 4 if not using Puppy RailsStand up one Side Wall (A) and one Long Puppy Rail(E) (Fig. 1) and insert the hooks from the puppy railinto the matching slots on the side wall. (Fig. 2) Slideto lock. Repeat for second Side Wall.Note: Distance from the edge of the side wall to thepuppy rail should be the same on each end of the sidewall. (Fig. 3) If the distance is not the same, (Fig. 4)remove the puppy rail, rotate 180 degrees andreinsert.STEP 3:Repeat Step 2 for the Front Wall (C), Rear Wall (D),and the Short Puppy Rails (D).Note: The distance from the edge of the front/rear wallto the puppy rail will be greater than Step 2 (Fig. 3),but should still be equal on both ends of the puppy rail.Fig. 1SlotHookInsertSlide to LockNoToolsRequiredMade in the U.S.A.Correct – Samespace on bothsides of puppy railIncorrect – Space isnot equal on bothsides of puppy rail.Rotate puppy rail180 degrees |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine