Land Pride 318-586A Operator's Manual
 |
1© Copyright 2010 PrintedManual No. 318-000MAll Rotary Cutter SeriesRotary CutterBlade Bolt Kit11/19/10! DANGER!Always disconnect main driveline from tractor PTO beforeservicing underside of cutter deck. Cutter can be engaged iftractor is started resulting in damage to the cutter, bodily injuryor death.Tools required:1. Align dishpan blade bolt hole with access hole indeck.2. Place tractor gear selector in park and/or set brakes,shut engine off and remove ignition key.3. Disconnect main driveline from tractor PTO andsecure cutter deck in the up position with solidsupports before servicing underside of cutter.4. Start by assembling blades without shim (#2). Insertblade bolt (#1) through blade (#3), dish pan (#4) andflat washer (#5). Temporarily secure blade with aused 1 1/8"-12 nut. Draw nut up snug. Do nottighten.5. Check blade deflection. If deflection is greater than3/4", remove blade bolt and reassemble as beforeexcept include shim (#2) in the assembly. Selectshim thickness based on deflection. The greater thedeflection, the thicker the shim.6. Once blade deflection is correct, replace used nutwith new locknut (#6) and torque to 450 ft. lbs.• Safety Glasses• Work Gloves• Flat Tip Screwdriver• Used 1 1/8"-12 Nut• 1 11/16" Socket• 10" Socket Extension• Torque Wrench(450 ft. lbs. Capacity)IMPORTANT: Replacement blades should beordered in pairs. Order only genuine Land Prideblades. Other blades may not meet specifications.IMPORTANT: Both blades should weigh the samewith not more than 1 1/2 oz. difference.IMPORTANT: Refer to your Operator’s Manual ordeck decal for direction of blade rotation to ensurecorrect blade placement. Cutter blades must beinstalled with cutting edge leading in rotation.IMPORTANT: Shim (#2) below may or may not berequired. If blade deflection is less than 3/4" withouta shim, then the shim is not used. However, a shimis required if blade deflection is greater than 3/4".IMPORTANT: Locknuts can loose their ability to lockproperly once removed. Therefore, always use aused blade nut or plain nut in steps 4 & 5 below andthen replace used nut with new locknut in step 6.Your Blade Bolt Kit is exclusively designed for your LandPride Rotary Cutter. Please read these installationinstructions and your Rotary Cutter Operator’s Manualthoroughly before beginning. Especially read informationrelating to safety concerns.A separate Parts Manual for your Rotary Cutter isavailable free of charge at www.landpride.com or can bepurchased from your local dealer. Have model and serialnumbers handy when placing an order.A detailed listing of parts for this accessory kit is listedbelow. Use the list as a checklist to inventory partsreceived. Please contact your local Land Pride dealer formissing hardware.! WARNING!Always secure cutter deck in the up position with solid supportsbefore servicing underside of cutter. Never work underequipment supported by hydraulic jacks. Hydraulic jacks candrop equipment if controls are actuated or if hydraulic linesburst. Either situation can drop the cutter instantly even whenpower to the hydraulic system is shut off.When you see this symbol, the subsequentinstructions and warnings are serious - followwithout exception. Your life and the lives ofothers depend on it!!IMPORTANT: Before you begin, read theseinstructions and check to be sure all parts and toolsare accounted for. Please retain these instructionsfor future reference.Blade Bolt Kit 318-586A w/.25 Key or 326-185A w/.18 KeyItem Qty Pt No Description1 1 802-277C Blade bolt 1 1/8-12 x 3 7/16 w/ .25 keyor 802-920C Blade bolt 1 1/8-12 x 3 1/2 w/ .18 key2 1 318-586D Blade spacer 28 GA. (.015") Note: Thisspacer is supplied with 802-920c blade bolt only.2 1 312-075D Blade spacer 16 GA. (.060")2 1 312-082D Blade spacer 18 GA. (.048")2 1 312-089D Blade spacer 20 GA. (.036")2 1 312-808D Blade spacer 24 GA. (.024")5 1 804-147C Washer flat 1 hard ASTMF4366 1 803-170C Nut hex top lock 1 1/8-12 plateN/A 1 318-000M Manual, blade bolt kit3/4" Maximumblade deflectionwhen bladebolts are tight |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine