104Rotary Cutters Single DeckSpecifications & CapacitiesDesigns, specifications, features and information are subject to change without notice.RCR25 SeriesRCR2596 (540 RPM)RCR2510 (540 RPM)RCRM2510 (1000 RPM)Machine Weight (With Front andRear Chain Shields)Lift-Type 1,380 lbs.Pull-type 1,665 lbs.Lift-Type 1,750 lbsPull-Type 2,035 lbs.Hitch Lift-Type Category 1 & 2Quick hitch adaptablePull-Type - w/Dual Level RodsLift-Type Category 2 & 3Quick-Hitch adaptablePull-Type - w/Dual Level RodsCutting Width 94” 118”Overall Width 99 3/4” 123 1/2”Overall Length Lift-Type: 106”Pull-Type: 140 3/4”Lift-Type: 112”Pull-Type: 150”Deck Height 9 5/8”Cutting Height 2” - 12”Cutting Capacity 1 1/2” 1"Tractor H.P. Rating (PTO) Lift-Type: 50 - 110Pull-Type: 40 - 110Lift-Type: 60 - 110Pull-Type: 50 - 110PTO SpeedGearbox Rating H.P. Center - 100 HP Outboard 60 HPGearbox(Speed up beveled gears)540 rpm or 1000 rpm PTO Driven GearboxCast Iron Housing, Beveled GearsGearbox Lubrication 80-90W EPGearbox Oil Capacity End BoxesT-Box2.5 Pints4.5 Pints2.5 Pints4.5 PintsGear box Input/ Output Shaft Size Input Shaft = 1 3/4” - 20 SplineOutput Shaft = 2” Dia.Deck Material Thickness 10 gaugeDeck Side Skirt ThicknessSkids ReplaceableStump Jumper Round Pan 3/16”Blades (2) 1/2” x 4" Heat TreatedFree-Swinging Suction BladesBlade Bolts Keyed with Harden Flat Washer and Lock NutBlade Tip Speed 540 RPM 14,592 fpm 540 RPM 17,749 fpm1000 RPM 18,035 fpmDriveline Cat 4, w/Equal Angle U-Joint Cat 4 w/Equal Angle U-Joint orConstant Velocity U-JointDriveline Protection 540 rpm - 4 plate slip clutch1000 rpm - 2 plate slip clutchTailwheel Lift-Type: 2 ea. 4” x 8” x 15 1/4” LaminatedPull-Type: 2 ea. 6” x 9” x 21” Laminated or 24” Aircraft tires or 15” Automotive RimsOptional Safety Shields Front & Rear Chain/ Front & Rear Rubber312-753S continues on next two pages 3/05/12