Land Pride Snow Plow Assembly Instructions Manual

Also see for ST Treker Series: Assembly instructions

Contents

Land Pride Snow Plow Assembly Instructions Manual Manual pdf 1 page image

1© Copyright 2007 PrintedBefore You StartYour Snow Plow is exclusively designed for your LandPride NT & ST Treker. Please read these installationinstructions and your NT & ST Treker Operator’s Manualthoroughly before beginning. Especially read informationrelating to safety concerns. Also included in theOperator’s Manual is important information on operation,adjustment, troubleshooting, and maintenance for thisattachment (some manual sections do not apply to allaccessories).General InformationThese assembly instructions apply to the following SnowPlow Accessories listed below:701-067A NT 60" SNOW PLOW701-068A ST 60" SNOW PLOWFurther AssistanceYour dealer wants you to be satisfied with your newSnow Plow. If for any reason you do not understand anypart of this manual or are not satisfied with the servicereceived, the following actions are suggested:1. Discuss the matter with your dealership servicemanager making sure he is aware of any problemsyou may have and that he has had the opportunity toassist you.2. If you are still not satisfied, seek out the owner orgeneral manager of the dealership, explain theproblem and request assistance.3. For further assistance write to:Land Pride Service Department1525 East North StreetP.O. Box 5060Salina, Ks. 67402-5060E-mail addresslpservicedept@landpride.comWhen you see this symbol, the subsequentinstructions and warnings are serious - followwithout exception. Your life and the lives ofothers depend on it!!IMPORTANT: Before you begin, read theseinstructions and check to be sure all parts and toolsare accounted for. Please retain these installationinstructions for future reference and parts orderinginformation.! DANGERExercise EXTREME CAUTION when plowing. Always plow ata slow speed.! WARNINGTO AVOID SERIOUS INJURY OR DEATH:1. DO NOT EXCEED 5 MPH WITH BLADE INSTALLED.2. OPERATE WITH EXTREME CAUTION ON SLOPES,STEEP GRADES, AND ROUGH TERRAIN.3. KEEP AWAY FROM BLADE AND MOVING PARTSDURING OPERATION.4. WHEN PLOWING SNOW OR DIRT INTO A PILE, STARTBACKING UP BEFORE RAISING THE BLADE.5. DO NOT RAM THE BLADE INTO THE PILE. ** SLOWDOWN BEFORE HITTING PILE. **6. BE AWARE OF POSSIBLE HIDDEN OBJECTS UNDERSNOW.! CAUTIONTO AVOID PERSONAL OR OTHER INJURY:1. READ BLADE OWNER?S MANUAL, ATV OPERATOR?SMANUAL, AND SAFETY DECALS BEFORE OPERAT-ING.2. WEAR HEAD PROTECTION, SAFETY GLASSES, ANDSHOES AS RECOMMENDED IN ATV OPERATOR?SMANUAL.3. ALLOW NO RIDERS ON BLADE OR ATV WHILEMOVING OR STATIONARY.4. KEEP BYSTANDERS AWAY FROM BLADE OR ATVWHILE MOVING OR STATIONARY.5. BEFORE ADJUSTING BLADE ANGLE STOP ATVENGINE, SET AND LOCK BRAKES, RAISE AND LOCKBLADE IN UP POSITION. DO NOT ATTEMPT TO RAISEBLADE BY HAND; USE THE LIFT HANDLE ONLY.6. BEFORE ADJUSTING BLADE HEIGHT: LOWERBLADE TO THE DOWN POSITION.7. WHEN BLADE IS NOT IN USE, STOP ATV ENGINE, SETAND LOCK BRAKES, AND LOWER BLADE TO DOWNPOSITION.! ! ! OPERATION ! ! !Your blade and hardware were designed with your safetyin mind. In order to protect you and your machine, certainparts of the blade and / or hardware are designed to failwhen the equipment is over stressed. For this reasonPush Tubes, Blade Hinges, Foot Peg Brackets, PushPlate Attaching Pins and Clevis Pins are not covered byWarranty.Blade angle is adjustable. Lock blade in the up position.To move the blade left, right or straight, pull the BladeTreker NT & ST SeriesSnow PlowAssembly Instructions06/26/07Manual No. 701-157M