© Lanner Electronics Inc. All Rights Reserved. All product specifications are subject to change without notice.The rackmount rail kit can be purchased as an accessory for existing systemincluding models: NCA-2510, NCA-2512, NCA-2520, NCA-4010, NCA-4012,NCA-4112, NCA-4025.The rackmount kit contains the following items:2x Fixed Brackets2x Adjustable Brackets4x Flat-head ScrewsEnsure that you have the following parts and tools available:2x Mounting Ears (Provided with system)6x Mounting Ear screws8x Rack-mounting screws1x Screwdriver, number 2You can mount the network appliance on four posts in a 19-in rack or cabinet byusing the rackmount kit.Note: Installing the system in a rack requires two people: one person lifts the systemwhile the other secures it to the rack.If you are installing multiple systems in one rack, install the lowest one first andproceed upward in the rack.1. Attach the mounting ears to the front of the system chassis, using three (3)mounting ear screws on each side to secure. Then, attach the fixed brackets tothe sides of the system, using two (2) flat-headed screws on each side to secure.2. Slide the system into the rack, and secure the mounting ears to the rack, usingtwo (2) rack-mounting screws on each side.Note: Ensure the rear of the system is supported throughout the process ofmounting the system into the rack.P/N: 086W000457000