Laser Pegs 1070 Model Instructions

Also see for 1070: Instruction manual Model instructions Instructions Model instructions Model instructions

Laser Pegs 1070 Model Instructions Manual pdf 1 page image

1070For Boys And GirlsAges 5 And Up57 Models+LIGHTEDCONSTRUCTION SET INCLUDES:• 35 Laser Pegs®• 225 Construction parts• 3D Lite Board®• Instruction ManualRequires 3 AA BatteriesBatteries NOTIncludedBatteries NOTIncludedThis manual is copyright and cannot be reproduced or used online without LaserPegs®Ventures LLC permission. Copyright 2012 © All Rights Reserved US Patent#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures LLC.8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.comLaser Peg® Parts ListEach Laser Peg® is color coded on the circuit board insideeach shape. There is No LED In The 90 Degree Peg.Construction Parts Listwww.LaserPegs.comColorCodeConnecting PegsPress button to turn on/offPush button to cycle through 3 different light settings.Peg HolesAC AdapterConnectionRequires (3AA) BatteriesRequires (3AA) BatteriesRemove all batteries from laser Pegs®3D lite Board® power base before using5 volt AC adapter.SQUAREPEG45° PEG90° PEG WHEEL PEGStackableSTRAIGHTT-PEGSTRAIGHTHALF-OPEGY PEGAny creation you can buildThere is No LED In The 90 Degree PegSQUAREM-M PEGSTRAIGHTM-M PEGAC AdapterINPUT is on side of3D Lite Board®.Battery CompartmentPower Button3 light settings.Press power button tochange light setting.HingePull outwardto open.Place batteries inthe correct positionwhen using.Tote BoxDesigned for storageof Laser Pegs® parts.Peg Holes Peg HolesConnecting an AC AdapterPlug AC Adapter plug into the side of the 3D Lite Board®.Connect Laser Pegs® to 3D Lite Board®NEVER place AC AdapterPlug into top Peg HolesUse Phillips headscrewdriver.3D Lite Board®Please read manual before you begin! Failure tofollow this manual’s instructions may result indamage to the 3D Lite Board®, AC Adapter and/or Laser Pegs®. Not adhering to these directionswill void the manufacturer’s warranty.Packing has to be kept since it containsimportant information.To construct with Laser Pegs®, slide two pieces together to form aconnection. Slide each piece on and off smoothly. To build away from theTriangle Power Base, use the peg cord in one of the top three peg holes toilluminate your model! The 90° pegs are essential to construction but theyDO NOT ILLUMINATE.WARNING! Each Laser Peg® draws current from the batteries. Therefore,the more pegs you use, the quicker you will deplete your battery power!As the power weakens, the current will slowly fail and some Laser Pegs®will illuminate (typically the reds and yellows) and some won’t. When theLaser Pegs® dim the Laser Pegs® are not broken, they just need strongerbatteries or an AC Adapter.You have 3 simple options...1. Use a 5 volt AC Adapter –available from www.LaserPegs.com2. Change the batteries.3. Use high quality batteries. They will last a little longer, but they willstill deplete rapidly the more laser pegs you connect!Laser Pegs® link thatallows you to connect toother construction kits.Power buttonAll additional model instructions canbe downloaded at www.LaserPegs.comMODEL INSTRUCTIONSLaser Pegs® Stackable*To avoid short-circuits, keep metal objectsand other un-authorized materials fromobstructing the peg holes.The AC Adapter used with the power base are to be regularly examined fordamage to the cord, plug, enclosure and other parts, and in the event of suchdamage, they must not be used until the damage has been repaired.When Using Batteries®x4x4x6 x6x6x4x2x16 x8 x4x8x8x12x16x6x6x1x8x8x8x8x6x20x8x6x6x6x16x8x2x2x2x4x4x8x3x1x1x1x7Compatible with other construction kitsWARNING:CHOKING HAZARD- Small parts.Not for children under 3 yrs.Do not submerge in water.Construction CompatibleEN71, RoHS COMPLIANTThis product complies toall safety requirementsof ASTM F 9631. Remove screws.2. Place three AA batteries in the correct position - as displayed inside the3D Lite Board®.3. Push RED button to turn on!4. Do not mix old and new batteries.5. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium)batteries!6. Exhausted batteries are to be removed from the power base.7. Never connect more than 200 Laser Pegs®8. Non-rechargeable batteries are not to be recharged.9. Rechargeable batteries are only to be charged under adult supervision.10. Rechargeable batteries are to be removed from the toy before beingcharged.11. Batteries are to be inserted with the correct polarity.12. The supply terminals are not to be short-circuited.Never connect more than 200Laser Pegs® when using a 5 volt(2000mA) AC Adapter.*AC Adaptersold seperatley.BatteryCompartmentBattery CompartmentA1STEP2STEP3STEPModelDifficultyLevelMERMAID — A ficticious half-humansea creature with a woman’s upper-body and the tail of a fish.MERMAID

/ 4

Related manuals for Laser Pegs 1070