Laser Pegs 9025 Instructions For Use Manual

Also see for 9025: Instructions Model instructions Instructions for use

Laser Pegs 9025 Instructions For Use Manual Manual pdf 1 page image

45° PEGPlease read manual before you begin! F ailure tofollow this manual’s instructions may result indamage to the Triangle Power Base, AC adapterand/or Laser Pegs®. Not adhering to thesedirections will void the manufacturer’s warranty.Packing has to be kept since it containsimportant information.This manual is copyright and cannot be reproduced or used online without LaserPegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® V enturesLLC. 8304 Consumer Ct., S arasota F L 34240. Contact: S upport@LaserPegs.comCompatible with other construction kitsEach Laser Peg® is color coded on the circuit board insideeach shape. There is No LED In The 90 Degree Peg.Laser Pegs ® link thatallows you to connect toother construction kits.Triangle PowerBasewww.LaserPegs.comLaser Pegs®Peg CordColorCodeWARNING:CHOKING HAZARD-Small parts.Not for children under 3 yrs.Do not submerge in water.All additional model instructions canbe downloaded at www.LaserPegs.comMODEL INSTRUCTIONSConstruction CompatibleLaser Pegs® StackableEN71, RoHS COMPLIANTThis product complies toall safety requirementsof ASTM F 9639025For Boys And GirlsAges 5 And Up16 Models+LIGHTEDCONSTRUCTION SET INCLUDES:• 20 Laser Pegs®• 80 Construction Parts• Triangle Power Base• Instruction ManualRequires 3 AA BatteriesBatteries NOTIncludedLaser Pegs® Parts ListConstruction Parts ListSQUAREPEGWHEEL PEGTRIDENT PEGTRUSS PEG STACKABLESTRAIGHTT-PEGY PEGAny creation you can buildThere is No LED In The 90 Degree PegSQUAREM-M PEGGx4x2x2x1x4x4x2x2x4x2x2x1x1x2x1To construct with Laser Pegs®, slide two pieces together to form aconnection. Slide each piece on and off smoothly. To build away from theTriangle Power Base, use the peg cord in one of the top three peg holes toilluminate your model! The 90° pegs are essential to construction but theyDO NOT ILLUMINATE.Connecting PegsPress buttonto turn on/offPush button to cyclethrough 3 differentlight settings.Power Button Peg HolesAC AdapterConnectionConnect Laser Pegs® TRIANGLE POWER BASETo build away from the Laser Pegs®Triangle power base use the pegcord in one of the top three holes toilluminate your model!Remove the three Philips headscrews with a 4mm screw driver.Requires (3AA) BatteriesUsing anAC AdapterRemove all batteriesfrom Laser Pegs® powerbase before using the5 volt AC adapter.When using an ACAdapter, NEVERplace the adapterplug into the Tri-angle Power Basetop peg holes.Connect cord to model.When you remove a peg from anotherpeg or model DO NOT PULL ON CORD!When Using BatteriesWARNING! Each Laser Peg® draws current from the batteries. Therefore, the morepegs you use, the quicker you will deplete your battery power! As the powerweakens, the current will slowly fail and some Laser Pegs® will illuminate (typicallythe reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs®are not broken, they just need stronger batteries or an AC Adapter.You have 3 simple options...1. Use a 5 volt AC Adapter –available from www.LaserPegs.com2. Change the batteries.3. Use high quality batteries. They will last a little longer, but they will still depleterapidly the more laser pegs you connect!*To avoid short-circuits, keep metal objects andother un-authorized materials from obstructingthe peg holes.The AC adapter used with the power base are to be regularly examined fordamage to the cord, plug, enclosure and other parts, and in the event of suchdamage, they must not be used until the damage has been repaired.1. Remove screws.2. Place three AA batteries in the correctposition - as displayed inside the TrianglePower Base.3. Push RED button to turn on!4. Do not mix old and new batteries.5. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium)batteries!6. Exhausted batteries are to be removedfrom the power base.7. Never connect more than 200 Laser Pegs®8. Non-rechargeable batteries are not to berecharged.9. Rechargeable batteries are only to becharged under adult supervision.10. Rechargeable batteries are to be removedfrom the toy before being charged.11. Batteries are to be inserted with thecorrect polarity.12. The supply terminals are not to be short-circuited.Never connect more than 200Laser Pegs® when using a 5 volt(2000mA) AC Adapter.x2x2x2 x4x2x290° PEGx2x4x2x2x4x1x2x2x4x2x8x8x2x4x1EXPERIENCE SERIESMYTHOLOGYx4ModelDifficultyLevelMINI MINOTAUR--The fierce half-man, half-bull creature fond of fighting.2STEP3STEPMINI MINOTAURA1STEP

/ 2

Related manuals for Laser Pegs 9025