Laser Pegs G1710B Instructions Manual

Also see for G1710B ICHTHYOSAUR: User guide

Laser Pegs G1710B Instructions Manual Manual pdf 1 page image

Please read this manual before you begin!Failure to follow this manual’s instructions mayresult in damage to the Triangle Power Base, ACAdapter and/or Laser Pegs®. Not adhering tothese instructions will void the manufacturer’swarranty. The packaging must be kept becauseit contains important information.This manual is copyright and cannot be reproduced or used online without LaserPegs®Ventures LLC permission. © Copyright 2014 All Rights Reserved US Patent#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®VenturesLLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.comEach Laser Peg® is color coded on the circuit board insideeach shape. There is No LED In The 90 Degree Peg.www.LaserPegs.comColorCodeWARNING:CHOKING HAZARD-Small parts.Not for children under 3 yrs.Do not submerge in water.All additional model instructions canbe downloaded at www.LaserPegs.comMODEL INSTRUCTIONSEN71, RoHS COMPLIANTThis product complies toall safety requirementsof ASTM F 963LIGHT UPCONSTRUCTION SET INCLUDES:G1710B• 27 Laser Pegs®• 191 Construction Parts- Laser Pegs® Peg Cord• Triangle Power Base• Instruction ManualRequires 3-AA BatteriesBatteries NOTIncludedLaser Pegs® Parts ListConstruction Parts List24 Models+ANY CREATION YOU CAN BUILDThere is No LED In The 90 Degree Pegx8x9x2x445° PEGx4x2x2x2x4 x8x9x2x2x2x6x2x4x8STACKABLEx4STRAIGHTT-PEG x3SQUAREM-M PEG x4 x4SQUAREPEGx8x29x14 x14x15x8x9x490° PEGx3x3x6x6x4Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.US Patent #7,731,558www.LaserPegs.comLaser Pegs® CARESQuestions? Comments?For additional compliance info:1-866-432-3735Contact: Support@LaserPegs.comTo construct with Laser Pegs®, slide two pieces together to form aconnection. Slide each piece on and off smoothly. The 90° Pegs areessential to construction but they DO NOT LIGHT UP.Connecting PegsWARNING! Each Laser Peg® draws current from the batteries. Therefore, the morepegs you use, the quicker you will deplete your battery power! As the powerweakens, the current will slowly fail and some Laser Pegs® will illuminate (typicallythe reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs®are not broken, they just need stronger batteries or an AC Adapter.You have 3 simple options...1. Use a 5-volt AC Adapter –available from www.LaserPegs.com2. Change the batteries.3. Use high quality batteries. They will last a little longer, but they will still depleterapidly the more laser pegs you connect!Using anAC AdapterRemove all batteriesfrom Laser Pegs® powerbase before using the5-volt AC adapter.When using an ACAdapter, NEVERplace the adapterplug into the Tri-angle Power Basetop peg holes.*To avoid short-circuits, keep metal objects andother unauthorized materials from obstructingthe peg holes.The AC adapter and the Triangle Power Base are to be regularly examined fordamage to the cord, plug, enclosure and other parts, and in the event of suchdamage, they must not be used until the damage has been repaired.Never connect more than 200Laser Pegs® when using a 5-volt(2000mA) AC Adapter.Please dispose of batteries properly as per state and local regulations.1. Remove the three (3) screws.2. Place three (3) AA batteries in the correctposition - as displayed inside the TrianglePower Base.3. Reassemble the Triangle Power Base.4. Replace the three (3) screws.5. Push RED Power Button to turn on!6. Do not mix old and new batteries.7. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium,NiMH) batteries!8. Exhausted batteries are to be removedfrom the Triangle Power Base.9. Never connect more than 200 Laser Pegs®10. Non-rechargeable batteries are not to berecharged.11. Rechargeable batteries are only to berecharged under adult supervision.12. Rechargeable batteries are to be removedfrom the toy before being recharged.13. Batteries are to be inserted with thecorrect polarity.14. The supply terminals are not to be short-circuited.15. DO NOT THROW BATTERIES INTO FIRE!Replacing BatteriesEnvironmental Phenomena* The unit may malfunction if subjected to radio-frequency interference. It SHOULD revert tonormal operation when the interference stops. If not, it may become necessary to turn the poweroff and back on, or remove and reinstall the batteries.* In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory,requiring the user to reset the devise by removing and reinstalling the batteries.WARNING: STROBE LIGHTSMAY CAUSE SEIZURESDO NOT SUBMERGE IN WATERRemove the 3 Phillips head screws3-AA BatteriesRemove the three Phillips headscrews with a 4mm screw driver.Requires (3AA) BatteriesT-REXLaser Pegs®Peg CordAges 5 +RedPower ButtonSOUND/ON/FLASH/FLASH FASTERPeg HolesAC AdapterConnectionPush RedPower Buttonto turn on/offPush Red Power Button tocycle through 4 differentlight settings.Sound ActivatedTriangle Power BaseThe toy is not to be connected to more thanthe recommended number of power supplies1STEP2STEP3STEP4STEP5STEP6STEPAModelDifficultyLevelTYRANNOSAUR REX5TYRANNOSAUR REX: This massive meat-eater had claw-like forelimbs, giant jaws, and teeth that sometimes grew up to 30centimeters (1 foot)—the largest of any dinosaur’s. Along with Stegosaur and Iguanodon, the Tyrannosaur Rex served asone of the inspirations for Godzilla.