Laser Pegs Runners 1320 A Instruction Manual
Please read manual before you begin! Failure tofollow this manual’s instructions may result indamage to the Power Base and/or Laser Pegs®.Not adhering to these directions will void themanufacturer’s warranty. Packing has to be keptsince it contains important information.To construct with Laser Pegs®, slide two pieces together to form a connection.Slide each piece on and off smoothly. The 90° pegs are essential to constructionbut they DO NOT ILLUMINATE.This manual is copyright and cannot be reproduced or used online without LaserPegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® VenturesLLC. 8304 Consumer Ct., Sarasota FL 34240. Contact: Support@LaserPegs.comCompatible with other construction kitsLaser Pegs® link thatallows you to connect toother construction kits.Allows you to connect to otherconstruction kits.Allows you to connect toboth Laser Pegs® and otherconstruction kits.CAR RUNNERS™ Power Basewww.LaserPegs.comEach Laser Peg® is color coded on the circuit board insideeach shape. There is No LED In The 90 Degree Peg.ColorCodeConnecting PegsRUNNERS™ POWER BASESwitch power button tocycle through the Runners™power settings.LIGHT/OFF/ON/FLASHPowerButtonPeg HolesConnecting Laser Pegs® to RUNNERS™ POWER BASE AVOID DAMAGE TO PEG HOLESWARNING:CHOKING HAZARD-Small parts.Not for children under 3 yrs.Do not submerge in water.All additional model instructions canbe downloaded at www.LaserPegs.comMODEL INSTRUCTIONSConstruction CompatibleLaser Pegs® StackableEN71, RoHS COMPLIANTThis product complies toall safety requirementsof ASTM F 963WARNING! Each Laser Peg® draws current from the batteries. Therefore, the morepegs you use, the quicker you will deplete your battery power! As the powerweakens, the current will slowly fail and some Laser Pegs® will illuminate (typicallythe reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs®are not broken, they just need stronger batteries.You have 2 simple options...1. Change the batteries.2. Use high quality batteries. They will last a little longer, but they will still depleterapidly the more laser pegs you connect!*To avoid short-circuits, keep metal objects andother un-authorized materials from obstructingthe peg holes.1320 ARUNNERS™For Boys And GirlsAges 5 And UpLIGHTEDCONSTRUCTION SET INCLUDES:• 4 Laser Pegs®• 24 Construction Parts• Runner Power Base• Instruction ManualRequires 3 AAA BatteriesBatteries NOTIncludedLaser Pegs® Parts ListConstruction Parts ListSTACKABLE6 Models+Any creation you can buildThere is No LED In The 90 Degree Pegx2x1x4x1x4Never connect more than 20pegs at one time.x2x4x1x2x2x2x1x2Remove the Philipshead screw with a4mm screw driver.Requires (3AAA) BatteriesRequires (3AAA) BatteriesWhen Using Batteries1. Remove screws.2. Place three AAA batteries in the correctposition - as displayed inside the Runners™Power Base.3. Switch power button setting tolight/on/flash4. Switch speed setting to engage motor.5. Do not mix old and new batteries.6. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium)batteries!7. Exhausted batteries are to be removedfrom the power base.8. Never connect more than 20 Laser Pegs®9. Non-rechargeable batteries are not to berecharged.10. Rechargeable batteries are only to becharged under adult supervision.11. Rechargeable batteries are to be removedfrom the toy before being charged.12. Batteries are to be inserted with thecorrect polarity.13. The supply terminals are not to be short-circuited.SpeedSettings*SpeedSettings*POWER SETTINGSSPEED SETTINGSAllows you to constructwith Laser Pegs®.Construction Part ConnectionThe Laser Pegs® Runners™ power base allows you to build with Laser Pegs® andconstruction parts to form models. It is battery operated to run on its own.LIGHT - Illuminates your modelOFF - Turns power offON - Turns on motion and lightFLASH - Light Flash with motionBatteryCompartmentThe Runners™ power base will not operate on its own if the speed setting is in neutral.*If your speed setting is in neutral the Runners™ will not run by itself.Once you have switched the speed setting to either medium or fastthe motor will engage.HitchHitchScrewRequires (3AAA) BatteriesPush Switch Push Switch(CENTER) Push SwitchMEDIUM NEUTRAL FAST |
Related manuals for Laser Pegs Runners 1320 A
Laser Pegs 1320 B Instructions Manual
Laser Pegs RUNNERS 1320 B Manual
Laser Pegs S5 RUNNER G1270B Instruction Manual
Laser Pegs S5 RUNNER GI270B Instruction Manual
Laser Pegs 1290 Instruction Manual
Laser Pegs 1070 Instruction Manual
Laser Pegs PB 1420B Instruction Manual
Laser Pegs 9020 Instructions Manual
Laser Pegs 1070 Instructions Manual
Laser Pegs 9020 Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine