Laser Pegs The Ultimate Toy For Kids 1000 Manual

Laser Pegs The Ultimate Toy For Kids 1000 Manual Manual pdf 1 page image

Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.US Patent #7,731,558www.LaserPegs.comPlease read this manual before you begin!Failure to follow this manual’s instructions mayresult in damage to the Triangle Power Base, ACAdapter and/or Laser Pegs®. Not adhering tothese instructions will void the manufacturer’swarranty. The packaging must be kept becauseit contains important information.To construct with Laser Pegs®, slide two pieces together to form aconnection. Slide each piece on and off smoothly. To build away from theTriangle Power Base, use the Peg Cord in one of the top three peg holes tolight up your model! The 90° Pegs are essential to construction but they DONOT LIGHT UP.This manual is copyright and cannot be reproduced or used online without LaserPegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®VenturesLLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.comCompatible with other construction kitsEach Laser Peg® is color coded on the circuit board insideeach shape. There is No LED In The 90 Degree Peg.Laser Pegs® link thatallows you to connect toother construction kits.Triangle PowerBasewww.LaserPegs.comLaser Pegs®Peg CordColorCodeConnecting PegsPush button toturn on/offPush Red Power Button tocycle through 3 differentlight settingsOFF/ON/FLASH/FLASH FASTER.RedButton PowerPeg HolesAC AdapterConnectionConnect Laser Pegs® TRIANGLE POWER BASETo build away from the Laser Pegs®Triangle Power Base use the PegCord in one of the top three holes toilluminate your model!Using anAC AdapterRemove all batteriesfrom Laser Pegs® PowerBase before using the5-volt AC adapter.When using an ACAdapter, NEVERplace the Adapterplug into the Tri-angle Power Basetop peg holes.Connect cord to model.WARNING:CHOKING HAZARD-Small parts.Not for children under 3 yrs.Do not submerge in water.All additional model instructions canbe downloaded at www.LaserPegs.comMODEL INSTRUCTIONSConstruction CompatibleLaser Pegs® StackableWhen you remove a peg from anotherpeg or model DO NOT PULL ON CORD!Replacing BatteriesEN71, RoHS COMPLIANTThis product complies toall safety requirementsof ASTM F 963WARNING! Each Laser Peg® draws current from the batteries. Therefore, the morepegs you use, the quicker you will deplete your battery power! As the powerweakens, the current will slowly fail and some Laser Pegs® will light up (typicallythe reds and yellows) and some won’t. When the Laser Pegs® dim, the Laser Pegs®are not broken, they just need stronger batteries or an AC Adapter.You have 3 simple options...1. Use a 5-volt AC Adapter –available from www.LaserPegs.com2. Change the batteries.3. Use high quality batteries. They will last a little longer, but they will still depleterapidly the more laser pegs you connect!*To avoid short-circuits, keep metal objects andother unauthorized materials from obstructingthe peg holes.The AC Adapter and the Triangle Power Base are to be regularly examined fordamage to the cord, plug, enclosure and other parts, and in the event of suchdamage, they must not be used until the damage has been repaired.1000For Boys And GirlsAges 5 And UpLIGHTEDCONSTRUCTION SET INCLUDES:• 38 Laser Pegs®• 159 Construction parts• Laser Pegs® Peg Cord• Triangle Power Base• Instruction ManualRequires 3-AA BatteriesBatteries NOTIncludedLaser Pegs® Parts ListConstruction Parts ListSQUAREPEG STACKABLE30 Models+ANY CREATION YOU CAN BUILDThere is No LED In The 90 Degree PegNever connect more than 200Laser Pegs® when using a 5-volt(2000mA) AC Adapter.45° PEG WHEEL PEGY PEG STRAIGHTT-PEGSQUAREM-M PEG90° PEGx7 x8x3x2 x4 x4x4x6x6x6x7x7x14x16x10x10x10x20x4x4x4x4x5x5x5 x2x2x2x8x2x2x2x21. Remove the three (3) screws.2. Place three (3) AA batteries in the correctposition - as displayed inside the TrianglePower Base. (Batteries are to be insertedwith the correct polarity.)3. Reassemble the Triangle Power Base.4. Replace the three (3) screws.5. Push RED Power Button to turn on!6. Do not mix old and new batteries.7. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium,NiMH) batteries!8. Exhausted batteries are to be removedfrom the Triangle Power Base.9. Never connect more than 200 Laser Pegs®10. Non-rechargeable batteries are not to berecharged.11. Rechargeable batteries are only to berecharged under adult supervision.12. Rechargeable batteries are to be removedfrom the toy before being recharged.13. The supply terminals are not to be short-circuited.Add 3-AA Batteries3-AA BatteriesRemove LR-44 BatteriesThe LR-44 batteries are only for the“Try-Me” function, they should be re-moved from the Triangle Power Baseand replaced with 3 - “AA” batteriesbefore giving it to the child.ModelDifficultyLevelREEF EXPLORER1STEP2STEP3STEP4STEPAABCOMBINEREEF EXPLORER - The Great Barrier Reef system is composed of 900 islands, 2,900 individual reefsand is the only natural structure visible from outer space.