LaserPro Venus User Manual
                                                           | |
NOTICEFor Firmware (V1.1 and later version), when under theSingle File Mode, the file can be repeated if you chooseto redo it. After the work is completed, the machinewill be back to the ìSTOPî status. The same file willbe processed again if you press the ìSTARTî key again.One thing that has to take into consideration is that thefile size has to be smaller than 15.9 MB (if memorybuffer for your machine is 16 MB) or 63.9 MB (if thememory buffer you have is 64 MB). If you choose tostart with a new file, you would have to press the ìDELFILEî button twice to clear out the memory. Then themachine will be ready to receive new data again. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine