QuickSTART MachXO5™-NX Development KitThis document provides a brief introduction to the MachXO5™-NX Development Kit.123Check Kit ContentsThe MachXO5-NX Development Board kit contains the following items: MachXO5-NX Development Board 12 V AC/DC Adapter and International Plug Adapters USB Cable for Programming via PC (USB-A to Mini-B) Quick Start Guide Lattice Radiant software download informationUsing the MachXO5-NX Development BoardThe MachXO5-NX Development Board as shipped supports Internal Flash boot-basedconfiguration. The internal Flash Configuration Memory is pre-loaded with a LED blink-ing demonstration program.Installing the softwareThe MachXO5-NX Development Board is pre-programmed with a basic demonstration.To develop your own solutions, download and use the Lattice Radiant design software(version 3.1 or later) in www.latticesemi.com/software.If you only need to re-program the board, you can use the Radiant Programmer Stand-alone software (version 3.1 or later).PowerSwitch(SW6)DIPSwitches(SW1)User LEDS(D1~D8)VS8 (J23)VIOS (J25)VS7 (J22)VS6 (J21)VS5 (J20)VS3 (J26)Power LED(D18)INIT LED(D11)Done LED(D10)SegmentLED Displayer(D20)MachXO5-25Device (U3) VS4(J29)Config USBHeader (J11)