Quick Start Guide5" Touch ScreenSelection ButtonsHOME ButtonCharging LEDOK ButtonReturn Button(Red: Charging.Green: Fullycharged.)Display TabletPower/ScreenLock ButtonDB-15 Diagnostic Connector5V Charging Port(To connect to vehicle's DLC (DataLink Connector) via diagnostic cable.)(To connect to external DCpower for charging the tool.)There are two charging methods available:Via Charging Cable: Plug one end of the included charging cable intothe 5V charging port of the tool, and the other end to the external DCpower.Via Diagnostic Cable: Insert one end of the diagnostic cable into theDB-15 connector of the tool, and the other end to the vehicle's DLC.Once the charging LED illuminates solid green, it indicates that thebattery is fully charged.Press the [Power] button to power it on.Follow the steps below to proceed.If it is the first time you have used this tool, you need to make somesystem settings and keep the diagnostic software synchronized withthe latest version.Charging & Turning OnGetting Started12LAUNCHTap “Start” on Welcome screenSelect system languageSelect time zoneWLAN setupConfigure email addressSign user agreementJob Menu appearsTap “Update”*Note: After you configured it,the system will automaticallysend the diagnostic report to youremail box every time a completeAuto-Detect process issuccessfully finished.*Note: To enjoy more capabilitiesand better service, you arestrongly recommended to updateit on regular basis.*Note: If you choose "Ignore" inthis step, it will go into the datesetting page. If the tool has beenproperly connected to the Internet,the system will automaticallyobtain the correct network date andtime.ENTOUCH PRO ELITE