Operation Step Action Result Illustration1 Press red button onthe motor Until motor beeps x 6Check themotordirectionCheck the direction ofthe motor by pressingUP or DOWN on theswitchIf correct go to set up lowerstop steps 2-4, if incorrect goto change motor directionstep 142 Press DOWN button Motor rolls down3When motor gets closeto the required lowerlimit, press STOP buttonMotor stops4 Press DOWNbutton AGAINMotor runs step by step toadjust lower limit accurately5 Press CONFIRM button The motor beeps x 1, and thelower limit has been set.6 Press UP button Motor rolls up7When motor gets closeto the required upperlimit, press STOP button.Motor stops8 Press UP button AGAIN Motor runs step by step to setupper limit accurately9 Press CONFIRM button The motor beeps x 1 and theupper limit has been set.Issue: 10/14R1705-RH, R1706-LH Battery Motor InstructionMotor Torque/speed: 0.7Nm/34rpm● Motor is combined with a wired switch and powered by a battery wand● The side of motor mount with SETTING button should face to you● Please replace batteries when the motor alarm soundsSet-upupper stopSet-uplower Stop1a) 1b)2)3) 4) 5)6) 7)8)Up ButtonDown ButtonConfirm Button9)