Lumingen SLD-PK Installation & Maintenance Manual
       |
Version: IAE Visit us at www.lumingen.com or Call us at 1-604-371-4112Installation &Maintenance ManualSLD-PK Area Flood LED LightingIMPORTANT SAFETY INSTRUCTIONS Mesures de Sécurité à RespecterThis product must be installed in accordance with the applicable installation codeby a person familiar with the construction and operation of the product and thehazards involved.Ce produit doit être installé selon le code d’installation pertinent, par une per-sonne qui connaît bien le produit et son fonctionnement ainsi que les risques in-hérents.LED Luminaire —Certified to Canada/US StandardsCSA C22.2 No. 250.0-18UL1598, 4th EditionSuitable for wet locations. Convient aux emplacements mouillés.Keep protective barrier in place. Ne pas enlever l’ecran protecteur.Mount this luminaire using only the mounting bracket supplied by the manufacturer or similar. Mount celuminaire utilisant uniquement le support de montage fourni par le fabricant ou similaire.Twist-on wire connectors are not re -usable. Replace only with un -used weatherproof twist -on wire con-nectors. Remplacer uniquement avec de nouveaux intempéries twist -on connecteurs de fils.Min 90OC supply conductors. Les fils d’alimentation doivent convenir pour 90 OC.Caution—risk of shock. Attention—risque de choc.Remove luminaire for maintenance. Enlevé luminaire pour l’entretien.Always keep protective metal plate and screws in place. Remove only when necessary. Garder toujours laplaque de protection en métal et les vis en place. Retirez uniquement si nécessaire.Not for use in dwellings. Ne pas utiliser dans les logements.Brief Introdu ctionUltra -versa tile high output lig hting luminaire to be installed via S uspension, Surfa ce/Wall, Pole, or Penda nt Stem.264579DANGERHigh Voltage.Turn off powerbefore servicing.!Wiring Ins tructio nsWiring from LED Driverto AC Supply, or LEDDriver Terminal BlockColouringWiring for 0-10VDimming, fromSeparate CordAC/Line Supply Connection (Black)AC/Neutral Connection (White)Earth Ground Connection (Green)Dim + Connection (Violet/as Labeled)Dim ‒ Connection (Gray/as Labeled)Basic Informa tionABYour locationHoles (see point A) on the side of the housing allow for ventilation of heat from the housing. Do not mountfixture where this ventilation may be obstructed.Lens cover (see point B) protects sensitive LED components from water damage and is rated for IP67 appli-cations. Do not remove lens cover, as this will compromise the water protection of the fixture.DANGERHigh Voltage.Turn off powerbefore servicing.! |
Related manuals for Lumingen SLD-PK
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine