Lyyt SA3-RGB User Manual
    |
SA3-RGBSound Activated RGBLED Tape ControllerItem ref: 153.740UKUser ManualVersion 1.0Caution: Please read this manual carefully before operatingDamage caused by misuse is not covered by the warrantyIntroductionThank you for your choice of SA3-RGB controller to connect with your low voltage multi-colourLED installation. This accessory has been designed to give dynamic and sound-activatedcontrol to the light output, adding colour and life to architecture, signage or furniture. Pleaseread this manual to get the best results from your controller and keep for future reference.The SA3-RGB controller is supplied with a 4-pin lead to connect to RGB LED tape which is fedfrom the controller via a removable euro-block connector with 4 screw terminals. Ensure thatthe R, G, B and V+ connections are matched to the LED tape and swap leads in the terminalsof the euro-block if necessary.Note: the SA3-RGB controller can operate with 12V or 24V LED tape up to 4A maximumoutput per channel red / green / blue (12A total). For longer runs of RGB tape with highercurrent requirements, RGB amplifiers with additional power supplies will be necessary. |
Related manuals for Lyyt SA3-RGB
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine