M7 QB-54502 Manual
                                                            |
11.The maximum recommended air pressure during operation must not exceed 90 psi(6.3bar). Higher air pressure may create unsafe operating conditions for the tool andthe user.2.The compressed air should be cooled and have a water filter installed at the outletend of the compressor. Even with a water filter installed, some water may stillcondense in the piping or hose and will enter the tool mechanism causing prematuredamage to the tool. Therefore, it is recommended to install an air filter-lubricatordevice somewhere between the tool and the compressor.3.Always use an air compressor of the proper capacity to operate each tool.4.Clean the hose with a blast of compressed air before connecting the hose to the airtool. This will prevent both moisture and dust inside the hose from entering the tooland causing possible rust or malfunction.1.Using these tools in any potentially explosive environment is strictly prohibited.2.It is always recommended that these types of tools must be operated when standingon a solid or firm location.3.Always use these tools in a well ventilated area.4.Slipping, stumbling and falling are the major causes of potential serious injury,therefore, a clean and clutter free surface in the working area before operating thetools is strongly recommended.Read this manual carefully before installing, operating,servicing or repairing.Working environment:Air supply and connection requirements: |
Related manuals for M7 QB-54502
manualsdatabase
Your AI-powered manual search engine