MADRIX USB SMPTE Quick Start Manual & Technical Manual
Also see for USB SMPTE: Quick start guide & technical manualQuick start guide & technical manual
  |
© 2001 – 2020 inoage GmbH | MADRIX® is a registered trademark | info@madrix.com | www.madrix.comKey FeaturesThis input device allows you to effortlessly use SMPTE time codefor time synchronization across your equipment and multiple devices.Data is received via the 3-pin, female XLR connector.The device can simply be connected to any USB 2.0 port.Example Of Use: Synchronize the automated playback of scenes and effectsin MADRIX® 5 by using the Cue List.Thank you for purchasing MADRIX® USB SMPTE!Please read this guide carefully and thoroughly before using MADRIX® USB SMPTE.Make sure that you fully understand all information.Technical SpecificationsSupply Of Power DC 5 V, 500 mA, Power over USBPower Consumption ~ 50 mA during normal operationUSB Port USB 2.0, type A plug, Plug and Play,2 m cablePlug 3-pin, XLR, female, NEUTRIKWeight 110 gOperating Temp. 10 °C to 50 °CStorage Temp. -10 °C to 70 °CRelative Humidity 5 % to 80 %, non-condensing(Operating / Storage)IP Rating IP20Certificates CE, RoHSPackage Contents1x MADRIX® USB SMPTE1x This quick start guide / technical manualMADRIX® USB SMPTE –Quick Start Guide & Technical ManualCopyright Information And Disclaimer© 2020 inoage GmbH. All rights reserved.Information is subject to change at any time and without prior notice.Errors and omissions excepted. Reproduction, adaptation, or translationwithout prior written permission is prohibited. inoage GmbH does not grantguarantee on validity for a particular reason, the marketability, or otherproperties of the product. There is no way to assert a claim to inoage GmbH,neither in the legal way nor in other ways. inoage GmbH is not responsiblefor damages, including all disadvantages that are not just limited to the lossof sales, but that are caused due to the use of the product, due to the lossof serviceability of the product, due to misuse, happenings, circumstances,or actions that inoage GmbH does not have influence on, no matter if thedamages as well as consequential damages are direct or indirect; whetherthey are special damages or others, nor if the damage is caused by the ownerof the warranty or a third person.8th Edition — July 2020Limited WarrantyFive years of limited manufacturer's warranty are granted tothe purchaser of this product with regards to constructionalfault, material defect, or incorrect assembly the manufacturerhas caused or is to be held responsible for. This warrantywill be void if the interface is opened, modified, or damagedthrough inappropriate handling, wrong usage, overvoltage, ordamaged through any other cause. All details are availableonline at www.madrix.com/warrantyEnd-Of-LifeThis electrical device and its accessories needto be disposed of properly. Do not throw thedevice into normal trash or household waste.Please recycle packaging material whenever possible.Please note: Check the package contents and thecondition of the interface after unpacking! Contact yoursupplier if something is missing or damaged. Do not usethe device if it seems to be damaged! |
Related manuals for MADRIX USB SMPTE
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine