Quick GuideMALÅ GeoDrone 80Assembly and Connections1) Make sure batteries are fullycharged. One battery at time can bechanged even if the unit is on.The batteries are found under the hatch2) Assemble and connect the twoantenna tubes to the main unit.The two antenna tubes assembled and connected to the radar unit.3) For better reception, use the GPSantenna extension cable (included).Connections for external GPS antenna and data cable togetherwith Power On/Off on the main unit4) Attach the MALÅ GeoDrone 80 tothe drone. Make sure this is firmlymade, so you do not drop theGeoDrone 80 during flight.Note: Land the drone smooth and care-fully so you do not harm the equipment.5) Ready to power up the MALÅGeoDrone 80 and the Controller!