MadgeTech, Inc.PO Box 50 l Warner, NH 03278Phone 603.456.2011 l Fax 603.456.2012www.madgetech.com l info@madgetech.comREV F 2010.04.12To view the full MadgeTech product line,visit our website at www.madgetech.com.Red 485Dark Blue Pantone 289Light Blue 58% of Pantone 289Product Information CardRTDTemp2000Product Quick Reference CardRTDTemp2000Precision RTD Based Temperature Recorder with LCD DisplayPart Number RTDTemp2000Temperature Sensor 100Ω Platinum RTDTemperature Range -200 to +850°CTemperature Resolution 0.01°CCalibrated Accuracy +0.05°C (-200 to +260°C)+0.3°C (+260 to +850°C)Memory 174,762Sample Rate 2 seconds up to 24 hoursRequired Interface Package IFC110 or IFC200Typical Battery Life 1 year @ 1 minute reading rate with display off, 30 daystypical with continuous LCD display useOptional AC adapter availableBaud Rate 115,200Operating Environment -20 to +60°C 0 to 95%RH (Non-Condensing)Materials Black anodized aluminumDimensions 4.8” x 3.3” x 1.25” (122mm x 84mm x 32mm)Approvals -Specifications subject to change.See MadgeTech’s terms and conditions at www.madgetech.comDevice MaintenanceBattery ReplacementMaterials:3/32” HEX Driver (Allen Key)Replacement Battery (U9VL-J)- Remove the cover from the device by unscrewing the fourscrews.- Remove the battery from its compartment and unsnap itfrom the connector.- Snap the new battery into the terminals and verify it is secure.- Replace the cover taking care not to pinch the wires. Screwthe enclosure back together securely.Note: Be sure not to over tighten the screws or strip the threads.Battery WarningWARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOTSHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, DISASSEMBLE,CRUSH, PENETRATE OR INCINERATE. BATTERY MAY LEAK OREXPLODE IF HEATED ABOVE 60°C (140°F).RecalibrationThe RTDTemp2000 standard calibration is two points, 50Ω and150Ω.Pricing:Recalibration traceable to NIST $60.00Recalibration $40.00Additional:As Found Data $15.00 per parameter/channelVerification Point $15.00 per pointTo send the devices back, visit www.madgetech.com, selectServices then RMA Process.