MagCore Plus II Operation Manual
Also see for Plus II: Service manualTroubleshooting guide
                                      |
MagCore® Plus IIOperation ManualCONTENTSSafety Precautions 1Intended use 2IVD Symbols Reference 4Specification 5━ Operating Parameters 5━ Operating Environment 5━ Applications 5Accessories 6Installation 6━ Before Installation 6━ System Overview 7━ Install Reagent Cartridge 8━ Install Tube, Tip 8━ Installation 9━ Installation Settings And Test 9━ Installation 10Touch Panel and User Interface 12Operation Before Starting the Instrument 13━ Emergency Stop 14━ Start Programs 15━ Saved Settings 16━ Access to Saved Settings 16━ Set and Select Users 17━ Set User 17━ Select User Name 17━ Scan Sample / Elution Tube 18━ Scan Kit Lot 18━ Pause and Abort 19━ Set Up the System Time 19━ Set the Instrument Nickname 20━ Network Connection Settings 20━ LIMS Data Collection 211 Get Data from USB Flash Drive 212 Access to information by Network Connection 22━ Remote monitoring APP 231 Download the APP 232 Registration 233 Log in the APP and Pair the Instrument 234 APP interfaces 24Easy Maintenance 27━ Replace O-Ring 27━ Piston Test 27━ Clean Piercing Needles 30━ Eject Tip 30━ Heater Test 31━ UV Sterilization 31━ Alarm History 32━ System Status 32━ Program Update 33━ Clean the Waste Box 33━ Replace Fuse 34Document Revision History 3615F, No.15, Qiaohe Rd,Zhonghe Dist, New Taipei City 235029, TaiwanSeptember 2022EN-MagCore® Plus IIOperation Manual-1.0.0 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine