PRODUCT: 30-1/4 in. KUBE BASEDIMENSIONS: 30-1/4 in. W x 17-1/2 in. D x 29 in. H(Dimensions are without vanity top)MODEL: KU.VB200KUBE VANITY BASESThank you for selecting our product. To ensure that your installation goes smoothly, please readthese instructions carefully before you begin. Also review the recommended materials and tools for asmooth installation.Before you start, verify that you have all the mentioned components for your vanity base modelshown below and ensure that all are free from defects. If any part is missing or damaged, contactCustomer Service for replacement parts.• Faucet and vanity top not includedBase (1x)Handle (4x)1 in. screw(8x)INSTALLATION INSTRUCTIONS FOR:PRODUCT: 38-1/4 in. KUBE BASEDIMENSIONS: 38-1/4 in. W x 17-1/2 in. D x 29 in. H(Dimensions are without vanity top)MODEL: KU.VB202Base (1x)Questions, problems, missing parts? Before returning to your retailer, call our Customer Servicedepartment at 1-866-396-4033, 8:30 a.m. - 5 p.m., EST, Monday - Friday. ContactUs@magickwoods.comTools Required for Assembly (not included):• Tape Measure• Electric Drill with #2 Drill Bit (A)• Straight Edge or Leveling Meter• (2) #8 x 2 in. Screws (B)• (2) Wall Anchors - if the vanity will notbe screwed to wall studs (C)• Pliers (D)Estimated Installation Time: 2 hours (including removal of old vanity if applicable)PREPARATIONHandle (4x)1 in. screw(8x)