Antenna inYour TV is designed to accept and display a wide range of video programs and signal sources,including VCRs, DVD players, high definition (HD) TV devices,video game consoles, and regular TV broadcasts. These are a sample of devices that can be connected to the TV's front and rear panel connectors.To view High Definition local broadcasts, connectyour outdoor or indoor antenna to the Antenna Ininput on the rear panel. To view Analog Cable,connect your Cable TV to the Antenna In input onthe rear panel.Refer to the illustration for thelocation of the Antenna In input.Connect a set-top box (cable or satellite) to the TVas follows:S-Video Video L RHeadphones Camera Game consoleQuick-Use and Setup Guide50" DLP™ HDTVWARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOTEXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.IMPORTANTThis owner's manual is used with several different television models. Not all features (anddrawings) discussed in this manual will necessarily match those found with your television set.This is normal and does not require that you contact your dealer or request service.MAGNAVOX representatives are ready to help you with any questions about your new product.Call us at 1-800-705-2000 or visit us on the web at WWW.MAGNAVOX.COM.AmplifierVCR PVR PC Antenna in HDMI deviceSet-top box DVDHooking up the TVHooking up cable TV/antennaFront panel Back panelConnecting a set-top box1. Connect the video output of theset-top box to the componentvideo (YPbPr) connectors of theAV3 input using RCA cables.Note: You can also connect thevideo output to the V connector.2. Connect the audio output (L/R) ofthe set-top box to the audio jacks(L/R) using RCA cables.Connecting a VCR Connecting a DVD Connecting a cameraFollow these instructions to connect a VCR(Video Cassette Recorder).1. Connect the video output of the VCR to theV connector of the AV1 input using an RCAcable. Alternatively, you can also connect it tothe S-video connector of the AV1 input using anS-video cable.2. Connect the audio output (L/R) of the VCR tothe audio jacks (L/R) of the AV1 input using RCAcables.Use the following procedure to connect a DVD playerto the TV.Connect the video output of the DVD player tothe V connector of the AV4 input using an RCAcable. Alternatively, you can also connect it to thecomponent (YPbPr) connectors.2. Connect the audio output (L/R) of the DVD playerto the audio jacks (L/R) using RCA cablesTo connect a camera to the TV, you can use theAV connectors located on the front connectorpanel (AV7). Alternatively, you can also use theAV connectors located on the rearpanel.1. Connect the video output of the camera tothe S-video connector on the front panel usingan S-video cable. Alternatively, you can alsoconnect it to the V connector using an RCAcable.2. Connect the audio output (L/R) of the camerato the audio jacks (L/R) using RCA cables.S-VideoS-VideoVideoVideoL RL RAntenna in1.HDMIHigh-definitionMultimedia Interfaceprovides anuncompressed,all-digital audio/videoconnection. HDMIprovides the ultimateconnection.Component VideoProvides superiorpicture quality byseparating the green,blue, and red luminancesignals. Typically usedwith red/white audiocables.S-VideoSupplies a better picturethan RF and Compositeconnections. Used withred/white audio cables.Composite Audio/VideoSeparate video (yellow)and audio (red/white)cables that provide abasic connection fromthe cable box or otherdevices.Note: The color of audioinputs may differ, e.g.red/white or red/black.RFProvides a basicconnection forantenna or cable.Provides bothaudio and video.Connection BasicsBest Better Good Basic Basic