Models No.DescriptionPRODUCTC ONCEPT AND MAIN APPLICATIONSP 1/ 12BTD129 (LXDT08)* 1Cordless Impact DriverS pecificationS tandard equipmentOptional accessoriesNote: The standard equipment for the tool shown above may vary by country.See the model variation list in the next page.Model BTD129 (LXDT08*1) Cordless Impact Driver has been developed specially forlight to medium duty fastening applications.This model is equipped with a basic BLDC motor (BrushLess DC motor) speciallydesigned to provide, above all, more work amount on a single full battery charge.This product is powered by 18V-1.3(1.5* 4)Ah/ 3.0Ah Li-ion batteries BL1815/ BL1830,and available in the variations listed in the next page.BatteryNo load speed: min.ˉ¹=rpmImpacts per min.: min.ˉ¹=ipmMax. fastening torque*5:N.m (kgf.cm/ in.lbs)Charging time (approx.): min.CapacitiesElectric brakeReverse switchWeight according toEPTA-Procedure 01/2003: kg (lbs)Variable speed control by triggerCapacity: AhCellVoltage: V 18V0 - 2,5000 - 3,200160 (1,630/ 1,420)Standard boltHigh tensile boltMachine screwDriving shankM5 - M14 (3/16 - 9/16")M5 - M12 (3/16 - 1/2")Coarse thread screw 22 - 125mm (7/8 - 4-7/8")M4 - M8 (5/32 - 5/16")YesYesYesLED job light Yes1.3 (2.9)/ 1.5 (3.4)1.3 (1.5*4)/ 3.0Energy capacity: Wh 24 (2.7*4)/ 54Li-ion22015/ 22 with DC18RC (DC18RA* 4)6.35mm (1/4") HexMax output (W)*4 for some countries only*5 The fastening torque at 3 seconds after seating, when fastening M14 high tensile bolt*1 Model number for North and Central American countriesHWDimensions: mm (")Width (W)Height (H)Length (L) 147 (5-7/8)79 (3-1/8)226 (8-7/8)* 2244 (9-5/8)* 3*2: with Battery BL1815*3: with Battery BL1830Phillips bitsSocket bitsDrill chucksBit pieceHole saws for Impact driverStopper for Impact driverHook set (Belt clip)Drill bits with 6.35mm Hex shankBattery protectorsLi-ion Battery BL1830Li-ion Battery BL1815Fast charger DC18RA(for USA, Canada, Guam, Panama, Colombia, Mexico)Fast charger DC18RC(for all countries except the countries above)Charger DC18SDCharger DC24SCAutomotive charger DC18SEL[Drawn above is the imagewith BL1830.]TECHNICAL INFORMATION