Model No.DescriptionC ONCEPT AND MAIN APPLICATIONSS pecificationDimensions: mm (")Width (W)Height (H)Length (L) 361 (14-1/4)77 (3)209 (8-1/4)HR2600/ HR2601Rotary Hammers 26mm (1")Chuck typeImpacts per minute= min¹ֿNo load speed: min¹ֿ= rpmSpecificationDouble insulationWeight according toEPTA-Procedure 01/2003*2: kg (lbs)Power supply cord: m (ft)Variable speed controlRotation reversing facilityOperation modeVibration absorptionModel*1 AVT (Anti Vibration Technology); Counterweight mechanism + Damper spring*2 with side grip Concrete TCT bitSteelWoodCore bitDiamond core bitCapacities:mm (")Continuous Rating (W)Voltage (V) Cycle (Hz) Input Output Max. Output (W)1101202202302407.773.83.73.550/ 6050/ 6050/ 6050/ 6050/ 60800---800800800400400400400400550550550550550127 6.6 50/ 60 800 400 550Current (A)Torque limiterHR2600/ HR2601Yes (by trigger)YesEurope, North America: 4.0 (13.1), Australia, Brazil: 2.0 (6.6),Other countries: 2.5 (8.2)Yes0 - 1,2000 - 4,600Adapted for SDS-PLUS shank bits26 (1)68 (2-11/16)2.8/ 2.9(6.2/ 6.3)2 modes(Rotation only/ Rotation with Hammering)No/ Yes (AVT*1)80 (3-1/8)13 (1/2)32 (1-1/4)YesNoLED Job light*Round shank bits can also be used byreplacing the factory-mounted chuck withQuick change drill chuck (keyless).PRODUCTP 1/ 13Model Operation Mode LED Chuck type2 modes(Rotation only/Rotation with hammering)3 modes(Rotation only/Rotation with hammering/Hammering only)NoNo26mmCapacity23mm23mm26mmNoNo Adapted forSDS-PLUS shank bitsAdapted forSDS-PLUS shank bitsand Round shank bits*YesNoAVTNoNoNoYesYesNoNoYesYesNoHR2300HR2310THR2610THR2611FTHR2600HR2601HR2611FHR2610HWLTECHNICAL INFORMATIONHR2600/ HR2601 are 26mm (1") 2-mode rotary hammers adapted forSDS-PLUS bits, featuring compact and lightweight design, enhanced comfortand better control with ergonomic handle. Model HR2601 is equipped with AVT;Anti Vibration Technology consisting of Active dynamic vibration absorberwith counterweight and Damper spring. AVT ensures operation withextremely low vibration, which is much superior to the competitors.HR2600 series models are available in the variations listed below, includingHR2300 and HR2610 series models developed on the same concept.For information of HR2300 and HR2610 series models,see “TECHNICAL INFORMATION ” of each series.