Powerful and Comfortable Operationwith Compact BodyComparison of Drilling EfficiencyNote: Numbers in the charts below are relative values when the capacities of competitor "B" are indexed at 100. Note: Numbers in the charts below are relative values whenthe capacities of competitor "H" are indexed at 100.Test conditions: Drilled in concrete with compressive strength of 40N/mm2 . Test conditions: Chipped concrete with compressivestrength of 40N/mm2 , and measuredthe amount of concrete removed.DrillingBit diameter: 14.5mm80 100 120 140fastslowMakita HR2811FCompetitor "H"100100Competitor "B" 10010085850Bit diameter: 22mm80 100 120 140fastslowMakita HR2811FCompetitor "H"130130Competitor "B" 10010070700 80 100 120 140fastslowMakita HR2811FCompetitor "H"1401401001000ChippingItems of standard equipment and specifications may differ by country or area.Combination Hammers HR2811F/FT, HR2810/T Rotary Hammer HR2800 325325Continuous rating InputCapacityConcrete : (with diamond core bit)Concrete : (with T.C.T. bit)Steel :Wood :Impacts per minute (ipm)No load speed (rpm)DimensionsNet weightPower supply cordHR2811F800W80mm (3-1/8")28mm (1-1/8")13mm (1/2")32mm (1-1/4")0 - 4,5000 - 1,100320 x 89 x 225mm(12-5/8" x 3-1/2" x 8-7/8")3.3kg (7.3lbs)4.0m (13.1ft)HR2810800W80mm (3-1/8")28mm (1-1/8")13mm (1/2")32mm (1-1/4")0 - 4,5000 - 1,100314 x 89 x 225mm(12-3/8" x 3-1/2" x 8-7/8")3.2kg (7.1lbs)4.0m (13.1ft)HR2811FT800W80mm (3-1/8")28mm (1-1/8")13mm (1/2")32mm (1-1/4")0 - 4,5000 - 1,100345 x 89 x 225mm(13-5/8" x 3-1/2" x 8-7/8")3.4kg (7.5lbs)4.0m (13.1ft)HR2810T800W80mm (3-1/8")28mm (1-1/8")13mm (1/2")32mm (1-1/4")0 - 4,5000 - 1,100339 x 89 x 225mm(13-3/8" x 3-1/2" x 8-7/8")3.3kg (7.3lbs)4.0m (13.1ft)HR2800800W80mm (3-1/8")28mm (1-1/8")13mm (1/2")32mm (1-1/4")0 - 4,5000 - 1,100314 x 89 x 225mm(12-3/8" x 3-1/2" x 8-7/8")3.2kg (7.1lbs)4.0m (13.1ft)Standard Equipment Quick Change Drill Chuck (HR2811FT, HR2810T only), Depth Gauge, Side Grip (Tool does not come with bit.)Double InsulationVariable SpeedReversingTorque LimiterDust CollectingSDS-Plus ShankCarrying CaseBuilt-in Job Light(HR2811F, HR2811FT only)Quick change drill chuck (Drill chuck set)For Model: HR2811FT, HR2810TPart No. 194079-2Dust cupDust cup setDust extractor attachmentPart No. 193472-7Bit dia: 12-16mm Part No. 421664-1Bit dia: 6-14.5mm Part No. 421342-3Part No. 194580-7AccessoriesNote: It may differ under some conditions.PRINTED IN JAPAN Z23326-2 2007-08 Note : Tool does not come with bitMakita Corporation3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 JapanSatisfy Professional's NeedsRotary Hammer HR2800 28mm (1-1/8")Combination HammersHR2811F/FT , HR2810/T 28mm (1-1/8") SDS-Plus ShankPhoto: HR2810 Photo: HR2810Photo: HR2811F