Makita RBC411U Technical Information

Also see for RBC411U: Instruction manual Instruction manual

Makita RBC411U Technical Information Manual pdf 1 page image

PRODUCTP 1/ 15Mixed gasoline1.140.2Models No.DescriptionC ONCEPT AND MAIN APPLICATIONSS pecificationS tandard equipmentOptional accessoriesRBC411UPetrol BrushcutterFuel tank capacity: LEngineDisplacement: cm³Fuel2-strokeTypeStarting system Recoil starterHandle styleCompliance with main exhaustemission regulations; CARB Tier 3,EPA Phase 2, EU Stage 2CarburetorNoFloat typeModel RBC411U is Petrol brushcutter developed based on Model RBC411powered by 40.2 cm³ 2-stroke engine; therefore, the engine for this model is notcomplied with well-known exhaust emission regulations.The development concept of this model is to increase maneuverability, whileproviding a cost advantage with newly designed Shaft section.Its other features are:• Symmetric design handle bar• Ergonomic grip for higher maneuverabilityNet weight*: kg (lbs)* Dry weight, without guard, cutting tool and shoulder harnessNote: The standard equipment for the tool shown above may vary by country.Double blade 305mm (12") ................................................................ 1Tool kit(inc. Socket wrench 17-19, Hex wrench 4 and Hex wrench 5) .......... 1Shoulder harness with double shoulder straps .................................... 1Accessory bag ..................................................................................... 1Triple blade 255mm (10"), Triple blade 305mm (12"), Star blade 230mm (9"), Star blade 255mm (10"),Double blade 305mm (12"), Eddy blade (8-tooth blade) 230mm (9"), Eddy blade (8-tooth blade) 255mm (10"),Saw blade 230mm (9"), Saw blade 255mm (10"), Nylon cutting head (Bump & Feed Z5L),Nylon cutting head (Ultra Auto 6L), Protector (for cutting blade only), Universal guard (=Protector),Universal guard extension670 (26-3/8)Dimensions: mm (")Width (W)Height (H)Length (L) 1,710 (67-1/2)430 (17)M10x1.25, Left-handed6,800Max. spindle speed at no load: min.ˉ¹ = rpm10,000Max. speed at no load: min.ˉ¹ = rpmSymmetric design bike handle7.3 (16)Spindle thread sizeMax. torque: N.mMax. output: kW (PS) 1.4 (2.0) [at 7,000 min.ˉ¹]2.2 [at 5,000 min.ˉ¹]TECHNICAL INFORMATIONNoNoPrimer pump NoRapid start(Spring-assisted recoil starter)Decompression valveStartingsystemLWH