P 1/ 10PRODUCTC ONCEPT AND MAIN APPLICATIONSS pecificationS tandard equipmentOptional accessoriesNote: The standard equipment for the tool shown above may vary by country.Model No.DescriptionMT817, MT818Hammer Drills 13mm (1/2")Models MT817 and MT818 have been developed as the cosmeticchange of maktec hammer drills MT811 and MT812.Their main features are:• Industrial performance and durability at less expense• Ergonomically designed handle with rubberized soft gripThe specification difference between these models are:MT817/ 13mm (1/2") hammer drill with Keyed chuckMT818/ 13mm (1/2") hammer drill with Keyless chuckThese models are also available with plastic carrying caseas “K” models; MT817K, MT818KNo1101202302404.1 50/6050/6050/6050/603.82.01.9430---430430220220220220340340340220 50/602.1 430 220 340340Continuous Rating (W)Voltage (V) Cycle (Hz) Input Output Max. Output (W)Current (A)Dimensions: mm ( " )Width (W)Height (H)Length (L)Model No.(The image above is MT817.)MT817 MT818255 (10) 258 (10-1/8)193 (7-5/8)72 (2-13/16)Chuck capacity: mm (")Chuck typeReverse switchImpacts per min.: min.ˉ¹= ipmCapacities: mm (")SteelConcreteWoodProtection against electric shockPower supply cord: m (ft)Weight according toEPTA-Procedure 01/2003*: kg (lbs)0 - 2,800Model No. MT8170 - 30,800Keyed1.5 - 13 (1/16 - 1/2)13 (1/2)13 (1/2)18 (11/16)YesDouble insulation1.8 (3.9)2.0 (6.6)MT818Keyless1.7 (3.7)Variable speed control by trigger Yes* with Side gripChuck key S-13 ................................................ 1 (MT817 only)Key holder 10 ................................................... 1 (MT817 only)Side grip ........................................................... 1Depth gauge ..................................................... 1 (for some countries)Cap ................................................................... 1 (for some countries)Plastic carrying case ........................................ 1 ("K models" only)No load speed: min.ˉ¹=rpmSpecificationTECHNICAL INFORMATIONHWL