Mangar AB0001 Fitting And User Instructions

Mangar AB0001 Fitting And User Instructions Manual pdf 1 page image

12” Grab Rail - Fitting and User Instructions MI0233 issue 4Congratulations on purchasing your 12” Grab Rail by Mangar International. TheGrab Rail offers a safe hand hold providing;a support to push or pull against when standing up or sitting down.•a steadying support while sitting• down.a firm grip whilst transferring from one position to another.•balance when standing or dressing.•Contents:1 x 12” Grab Rail.6 x wall fixing screws.6 x wall plugs.FittingWARNING: Before fitting, ensure that there are no concealed electrical cables orpipes where the fixing holes are to be drilled.The fixings supplied are ONLY suitable for use in solid walls. If fitting to1.plasterboard walls ensure suitable fixings are used. If in doubt consult aqualified tradesman.Position the Grab Rail on the wall either horizontally or at an angle to suit and2.mark the six hole locations.Drill the six holes to a depth approximately 5 mm greater than the length of the3.wall plugs provided and insert the plugs (A).Fit the screws (4. B) through the holes of the base and into the plugs and fullytighten.Push the covers (5. C) onto each base to conceal the screws and complete thefitting.BCA(Model: AB0001; AB0007 & AB0025)freedom through lightweight solutions

/ 2

Related manuals for Mangar AB0001