MuxLab 500024 Quick Installation Manual
  | |
Contents | 
© MuxLab Inc.SpecificationsEnvironment Baseband video; NTSC, PAL, SECAMDevices Close-circuit TV (CCTV) cameras, monitors, switchers, sequencers, multiplexers,digital video recorders (DVR) and other CCTV equipment.Transmission Transparent to the user.VideoBandwidth DC to 8 MHz.Impedance Input: 75 ohms (BNC); Output: 100 ohms (RJ45)Maximum Input 1.1Vp-pInsertion Loss Less than 2 dB per pair over the frequency range from DC to 8 MHzReturn Loss Greater than 15 dB over the frequency range from DC to 8 MHzCommon Mode Rejection Greater than 40 dB @ 8 MHzMax. Distance – Colour Cat 3 –1,200 ft (365m); Cat 5 – 2,200 ft. (670m)**Certain models of DVR may yield shorter distances of 1,000 to 1,500 ftMax. Distance – Black & White Cat 3 –1,500 ft (457m); Cat 5 – 2,500 ft (762m)Remote Power (i.e.; 24 VAC, 28 VAC)Wiring Remote low voltage power supported via three (3) twisted pairs. A Class II powersupply is recommended.Max. Distance @ 24VAC viathree (3) twisted pairs**Longer distances may beachieved @ 28 VAC.5 VA: 518 ft (170m)* 10 VA: 259 ft (85 m)*20 VA: 130 ft (43 m)* 30 VA: 86 ft (28 m)**Based on 10% voltage drop at camera. Please consult your CCTV equipmentvendor for more detailed performance specifications.Mechanical & EnvironmentalCable – UTP 24 AWG or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHzMaximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHzCable – Coax Impedance: 75 Ω at 1 MHz. (RG59/U). Max. 25 ft. of coax allowed end to end.Connectors Combined signals: RJ45 Video: BNC-male 8” mini-coax leadPower: 2-wire leadPin Configuration**Reverse polarity sensitiveSignal RJ45 Pin Cable Lead ColorPower A 1 (common with 3&5) RedPower B 2 (common with 4&6) BlackPower A 3 (common with 1&5) RedPower B 4 (common with 2&6) BlackPower A 5 (common with 1&3) RedPower B 6 (common with 2&4) BlackVideo BNC Center (Tip) 7 [T] opposite to 500000 Mini-coaxVideo BNC Ground (Ring) 8 [R] opposite to 500000 Mini-coaxTemperature Operating: 0° to 55°C. Storage:-20° to 85°C. Humidity: up to 95%Enclosure ABS fire retardant plasticDimensions 1.875” (4.7cm)x 1.0” (2.54cm) diameter plus cable leads; 8” (20cm) for video;10” (25.4cm) for power leadWeight 1.95 oz (55 gms)Warranty LifetimeOrder Information 500024 CCTV Power-Thru Balun, RJ45500029 CCTV Power-Thru Balun, Screw Terminals8114 Trans Canada Hwy, St. Laurent, Quebec, Canada, H4S 1M5Tel.: +1 (514) 905-0588 Fax: +1 (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.com94-000376-C SE-000323-CCCTV Power-Thru Balun (500024, 500029)Quick Installation GuideIntroductionThe VideoEase CCTV Power-Thru Balun allows video and remote power to betransmitted via one 4-pair Cat 5 cable, thus eliminating the need to install multiplecables for more efficient cabling. There are two models: 500024; with modular RJ45connector and 500029; with screw terminal connectivity. The CCTV Power-ThruBalun may be used in pairs or in conjunction with other MuxLab CCTV baluns suchas the 500000, 500009, 500015, 500022 and 500023.InstallationPre-Installation Checklist:Note: For regulatory reasons, use of a Class II power supply isrecommended and may be required with the use of this product in someregions.1. Ensure the CCTV equipment and remote power supply is turned off.2. One (1) twisted pair is required for the camera video signal. Three (3) twistedpairs are required for remote power.3. Verify that the cable length is within MuxLab specifications. The maximumdistance for video and remote power may be determined by consulting theproduct specifications or the CCTV Balun Application Guide available on-lineat www.muxlab.com/support.4. If the 500024 is being used, identify the pin configuration of the balun bychecking the product label or the specification section of this installation guide.5. If the 500029 is being used, remove the balun cover with the help of a smallflathead screwdriver. The screw terminals are labeled “R/T” (Ring/Tip) and“+/-“ for video and remote power respectively. |
Related manuals for MuxLab 500024
manualsdatabase
Your AI-powered manual search engine