MuxLab 500030 Quick Installation Manual
Also see for 500030: Quick installation guide
  | |
Contents | 
© MuxLab Inc.SpecificationsEnvironment Line level unbalanced analogue audioDevices DVD, VCR, camcorders, audio mixers, audio matrix switchers,audio splitters, audio distribution amplifiers, boosters, satellitereceivers, MPEG players, laptops, stereo audio amplifiers, audioswitchers, integrated TV monitors and other line level audioequipmentTransmission Transparent to the user.Bandwidth (3dB point)(400 O source & 50 kOreceiver)Up to 1,000 ft (305m): 60Hz - 20 kHz1,000 ft (305m) to 5,000 ft (1.5 km): 100Hz - 20 kHzMaximum Input Level 1.1Vp-pInsertion Loss per Balun Pair Less than 1 dB per pair over the frequency rangeCommon Mode Rejection(CMMR)Greater than 60 dB @ 1 kHzAudio Source Impedance Less than 600 ohmsAudio Receiver Impedance 10 k ohms or greaterImpedance TransformationRatioSingle unit: 4:1 (source: line)Cable – UTP 24 gauge or lower solid copper twisted pair wire impedance: 100ohms at 1 MHz. Maximum capacitance: 20 pf/foot.Attenuation: 6.6 dB/1000 ft at 1 MHzMax. Distance – Cat 5 UTP 5,000 ft (1,525m)Connectors Two (2) RCA-M 6” cable leadsOne (1) RJ45Pin Configuration (RJ45) Audio 1 (Left): pins 1[R] & 2 [T]Audio 2 (Right): pins 3 [R] & 6 [T]Temperature Operating: 0º to 55º C. Storage:-20º to 85º C. Humidity: up to 95%Enclosure ABS. Fire retardant plasticDimensions 1.875” x 1.0” diameter plus 6” audio leadWeight 1.0 oz (28 gms).Warranty LifetimeOrder Information 500030 Stereo PC-Audio BalunTel.: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.com94-000638-A SE-000638-AStereo PC-Audio Balun (500030)Quick Installation GuideIntroductionThe VideoEase Stereo PC-Audio Balun (500030) allows unbalanced line level stereoaudio to be transmitted up to 5,000 ft (1.5km) via unshielded copper twisted pair (UTP)in a point-to-point connection. The product is designed for mid-range audio applications.Used in pairs, the Stereo PC-Audio Balun eliminates costly and bulky audio cable,allowing audio equipment to be connected or moved within a structured cablingenvironment. The 500030 also works in conjunction with other MuxLab audio-videoproducts including the 500001, 500012, 500019, 500027 and 500200 for a morecomplete cabling solution. Applications include; audio distribution, custom residentialsystems and intercom systems.InstallationTo install the Stereo PC-Audio Baluns, perform the following steps:1. One Stereo PC-Audio Balun is required for the PC stereo output.2. Identify the pin configuration of the baluns. Two (2) twisted pairs are requiredas shown in the following diagram. |
Related manuals for MuxLab 500030
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine