MuxLab 500053-WP-US Quick Installation Manual
© MuxLab Inc. 2010 94-000680-A SE-000680-A8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsEnvironment Component Video (YPbPr), RGB Video (sync on green). 480i/p, 720p,1080i/p. Line level analog audio.Devices DVD players, satellite receivers, plasma displays, projectors, monitors,up-converters, amplifiers, switchers, home theatre and other equipmentsupporting HDTV component video and/or analog audio.Transmission Transparent to the userBandwidth Video: 60 MHz, 3 dB roll offAnalog audio: 20 Hz to 20 kHzMaximum Input 1.1 Vp-pInsertion Loss per Pair(Video)0.1 dB for 0.1 MHzGradually increasing to 3.0 dB over the frequency rangeInsertion Loss per Pair(Audio)Less than 2 dB per pair over the frequency rangeReturn Loss (Video) Greater than 15 dB over the frequency rangeCommon Mode RejectionRatio (Video)-55 dB max.Common Mode RejectionRatio (Audio)Greater than 60 dB at 1 kHzGreater than 40 dB over the frequency and distance rangeMax. Distance Color viaCat 5E/6 UTP/STP Cable480i/p: 1,000 ft (305 m)720p and 1080i: 500 ft (152 m)Analog Audio: 3,250 ft (990 m)Cable:Cat 5E/6 UTP/STP24 AWG or lower solid copper twisted pair wireImpedance: 100 ohms at 1 MHzMaximum capacitance: 20 pf/ftAttenuation: 6.6 dB/1,000 ft at 1 MHzCable: Coax Impedance: 75 ohms at 1 MHzConnectors Three RCA-F connectors: Green (Y), Blue (Pb), Red (Pr)One (1) RCA-F connector for analog audioRJ45S for twisted pairPin ConfigurationReverse polarity sensitiveRed (Pr): Pins 7(R) & 8(T) Green (Y): Pins 3(R) & 6(T)Blue (Pb): Pins 1(R) & 2(T) Analog Audio: Pins 4(R) & 5(T)Temperature Operating: 0° to 55°CStorage: -20° to 85°CHumidity: Up to 95% non-condensingEnclosure ABS fire retardant plastic, Color white, Finish glossy.Dimensions 86 mm x 86 mm x 36 mm. Choose 40 mm deep back box to allowfor Cat 5E/6 wiring connection.Weight 4.1 oz (115 g)Regulatory FCC, CE, RoHS, European Standard for 86 mm faceplateWarranty LifetimeOrder Information 500053-WP-US Component Video / Analog Audio Wall BalunUPC: 6-27699-91053-5Component Video/Analog Audio Wall Balun500053-WP-USQuick Installation GuideOverviewThe Component Video/Analog Audio Wall Balun (500053-WP-US) allows one componentvideo (YPbPr or RGB) signal and one Analog Audio signal to be transmitted via a cost-effective unshielded twisted pair (UTP) cable. Used in pairs, or in conjunction with the500048 or 500049, the Component Video/Analog Audio Wall Balun supports 480i/p, 720pand 1080i/p resolution for hi-definition (HDTV) video applications. The product allows fourcoaxial cables to be replaced by one Category 5E/6 twisted pair cable allowing standardstructured cabling techniques to be used for more efficient cabling.InstallationOne (1) pair of baluns is needed to complete one component (YPbPr/RGB) connectionvia Cat 5E/6 twisted pair. To install the baluns, perform the following steps:1. Identify the pin configuration of the baluns.Three (3) twisted pairs are required for videoand one (1) twisted pair is required for optionalanalog audio. The pin configuration follows theEIA/TIA 568A/B standard. The ComponentVideo/Analog Audio Balun is reverse polaritysensitive. Please ensure that wiring is straight-through (Ring to Ring, Tip to Tip). |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine