MuxLab 500087 Quick Installation Manual

MuxLab 500087 Quick Installation Manual Manual pdf 1 page image

© MuxLab Inc. 94-000796-A8495 Dalton Rd, Montreal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsEnvironment Digital AudioStandard Supported LPCM, Dolby Digital® 5.1, DTS, and Dolby® True HDInput / Output signal S/PDIF coax cable or TOSLINK optic cableData transmission rate Up to 6 Mbit/sConnectors RCA, TOSLINK, POWER, RJ45 on each unitPower requirement 1W max, 5V DCS/PDIF spec Coax 75 ohm with RCA connector,level: 500mVp-p into 75 ohmTOSLINK spec Plastic optic cable with EIAJ/JEITA RC-5720C connector,Wavelength: red 660nm, level: -15dBm maxCabling Requirement(not supplied)Coax and the second optic cableIncluded in this kit 1 x Converter unit, 1 x 5V Power supply,1 x Optic Cable 3ft (1m) and 1 x Installation guideCompatible mountinghardware500902, 500900, 500910, 500915Temperature Operating: -40° to 85°C (-40° to 185°F)Storage: -40° to 85°C (-40° to 185°F)Humidity Maximum 95% (non-condensing)Enclosure ABS UL94HB fire retardant plasticDimensions 2.25” x 2.25” x 1.0” (6 x 6 x 2.5 cm)Shipping Weight Less than 1 lb. (450g)Warranty 2 YearsOrder Information 500087 Digital Audio ConverterDIGITAL AUDIO CONVERTER500087Quick Installation GuideOverviewThe Digital Audio Converter allows one (1) source of digital audio signal: coax(S/PDIF) or optic (TOSLINK) to be converted to an optic or a coax signal respectively.It supports most standards used to transmit two channels of uncompressed lossless PCMaudio or compressed 5.1/7.1 surround sound such as Dolby Digital Plus or DTS-HDHigh Resolution Audio (multichannel digital audio Dolby Digital® 5.1, DTS, andDolby® True HD).ApplicationsConversion and Transmission of Digital Audio Signal

/ 2

Related manuals for MuxLab 20-1903