MuxLab 500409 Quick Installation Manual

Also see for 500409: Quick installation guide Quick installation guide Quick installation guide

MuxLab 500409 Quick Installation Manual Manual pdf 1 page image

© MuxLab Inc. 94-000914-A SE-000914-A2321 Rue Cohen, Montreal Quebec, Canada. H4R 2N7Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: info@muxlab.com URL: www.muxlab.comSpecificationsEnvironment HDMI 2.0Devices DVD, plasma, projectors, monitors, TV, PC, laptops, serverssupporting HDMI.Transmission Transparent to the userBandwidth 594MHzSignals HDMI 2.0 and HDCP 2.2Connectors One (1) HDMI receptacle.One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.One (1) 3.5mm jacks for 1-way IR (emitter or sensor) (IR portsupports carrier wave from 38 to 60KHz)Note: HDMI cables not included.Maximum DistanceBased on a maximumlength of 6.6 ft (2 m) ofHDMI cable per end.30m (100ft) at 4K/60 (4:4:4) uncompressed over Cat 6a/740m (130ft) at 4K/30 (4:4:4) uncompressed over Cat 6a/745m (148ft) at 1080p/60 uncompressed over Cat 6a/7Note: When installed in an electrically noisy environment, anSTP cable must be used. Also, cross-connection reduces theeffective distance depending on the grade of twisted cable used.RJ45 Pin ConfigurationReverse PolaritySensitive. Use EIA/TIA568A or 586B straight-through wiring.RJ45 LinkPin 1 (R) Pin 2 (T)Pin 3 (R) Pin 6 (T)Pin 4 (R) Pin 5 (T)Pin 7 (R) Pin 8 (T)Cable One (1) Cat 6a/7 or better twisted pair cables requiredPower Supply One (1) 110-240V/12VDC @ 2A with blade US, UK, EuroPower Consumption 6 WattsTemperature Operating: 0° to 40°C Storage: -20° to 70°CHumidity: Up to 95% non-condensingEnclosure Metal blackDimensions 90 x 44 x 23 mmWeight 1.02 lbs.Compliance Regulatory: FCC, CE, RoHSWarranty 2 yearsOrder Information 500409 HDMI / Bi-IR Extender KitHDMI Extender Kit500409Quick Installation GuideOverviewThe HDMI 2.0 Extender Kit allows HDMI equipment supporting uncompressed videoup to 4K/60 (4:4:4) resolutions to be connected over Cat6a/7 unshielded twisted paircable in a point-to-point configuration at distances up to 30m at 4K/60, 40m at 4K/30and 45m at 1080p. The unit supports HDCP 2.2, and audio pass-through up to DolbyAtmos & DTS:X. The HDMI 2.0 Extender Kit supports a 1-way IR port (carrier wave)for remote control of end devices. The kit comes with one (1) Transmitter and one (1)Receiver as well as an IR Emitter and IR Sensor for remote control applications.ApplicationsApplications include commercial and residential AV systems, classroom projectorsystems, digital signage, boardroom systems, collaborative PC systems, and medicalinformation systems.Installation1. Identify the connectors on the Transmitter and Receiver as indicated on the productlabels.Verify that the distance between the HDMI Transmitter and Receiver iswithin MuxLab specifications (see Specifications table).2. To install the Transmitter:2a Connect the Transmitter to the HDMI video source with an HDMI compliantcable.2b Connect one (1) length of Cat 6 (or higher) grade UTP cables toRJ45 LINK connectors on the Transmitter.3. To install the Receiver:3a Connect the Receiver to the HDMI display equipment with an HDMIcompliant cable.3b Connect the one (1) Cat 6 cable to RJ45 LINK connectors on theReceiver.4. This kit supports PoC, allowing the Transmitter to power the Receiver, or theReceiver to power the Transmitter. Connect the 12VDC power supply to either theReceiver or Transmitter first, and then plug the power supply into an AC poweroutlet. If power is present, the blue power LED of the Transmitter and the Receiverwill be ON.Note: Power the HDMI Extender only after all connections are made.5. Power the HDMI equipment and verify the image quality.6. Connect the IR Sensor to the 3.5mm Stereo Jack of the receiver and the IREmitter to the 3.5mm Mono Jack of the Transmitter.All manuals and user guides at all-guides.com

/ 2

Related manuals for MuxLab 500409