MuxLab 500789 Quick Installation Manual

Also see for 500789: Quick installation guide

MuxLab 500789 Quick Installation Manual Manual pdf 1 page image

© MuxLab Inc. 94-000941-A SE-000941-A2321 Rue Cohen, Montreal, Quebec, Canada, H4R 2N7Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: info@muxlab.com URL: www.muxlab.comSpecificationsSpecificationsEnvironment HDMI 2.0Devices TVs, monitors, projectors supporting HDMI.Signal Protocol/Standard HDMI 2.0 and HDCP 2.2Video Bandwidth 594MHzNetwork Bandwidth 25Mbps (typical)Protocols Supports Multicast & HLSConnectors Two (2) HDMI output connectors for AV.One (1) RJ45 Ethernet connection for LAN connection.Four (4) USB 3.0 connectors (for future use).One (1) 3.5mm output connector for audio extraction.One (1) 2.1mm power connector.Maximum Distance Cat5e/6: 330ft (100m) from Ethernet Switch. Unlimited over the InternetNote: When installed in an electrically noisy environment, an STP cable must beused. Also, cross-connection reduces the effective distance depending on the gradeof twisted cable used.RJ45 Pin ConfigurationReverse Polarity Sensitive.Use EIA/TIA 568A or 586Bstraight-through wiring.RJ45 LinkPin 1 (R) Pin 2 (T)Pin 3 (R) Pin 6 (T)Pin 4 (R) Pin 5 (T)Pin 7 (R) Pin 8 (T)Power Supply Includes a 12VDC/ 2A power adapter.Power Consumption 12WTemperature Operating: 0° to 40°C Storage: -20° to 85°CHumidity: Up to 95% non-condensingDimensions 4.5” x 4.0” x 1.6” (115mm x102mm x 42mm)Weight 1.44 lbs (0.65kg)Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0Warranty 3 yearsOrder Information 500789 4K Digital Signage Player Plus (UPC: 627699007891)4K Digital Signage Player Plus (500789)Quick Installation GuideOverviewThe 4K Digital Signage Player Plus (model 500789) is a digital signage player capable of receivingmultiple H.264/H.265 AV content simultaneously up to 4K/60 (4:4:4) from a local network, theInternet, or internal memory, and supports multiview capability and scheduling to automaticallydeliver this customized windowed AV content based on a yearly schedule. Multiple video, audioand image file formats are supported. The digital signage player delivers content to a display or toanother MuxLab AV over IP transmitters to support virtual matrix and video wall configurations.The exceptionally low bandwidth requirements of this device allows it to accept streamingaudio/video content over a local network and over the Internet for distributed installations spread-out throughout the globe.The digital signage player may be extended up to 100m from the Ethernet switch over CAT5/6cable.The MuxLab DigiSign Plus CMS (Content Management System) software for Windows isavailable to simplify the configuration and utilization of the 500789.ApplicationsApplications include digital signage / media player, audio/video streaming over LAN and Internet,commercial and residential AV systems, corporate lobbies, malls and boutiques, airports,subway/train/bus stations, etc.Installation1. Connect the player to the HDMI display equipment with an HDMI compliant cable, or alternatively

/ 2

Related manuals for MuxLab 500789