MuxLab GLI-500018 Quick Installation Manual
  | |
Contents | 
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.com© MuxLab Inc. 2010 94-000665-A SE-000665-ASpecificationsEnvironment S-Video equipmentDevices DVD players, satellite receivers, laptops, notebooks, monitors, LCDprojectors, CCD cameras, video switchers, S-Video splitters, S-Videoconverters and other S-Video equipmentTransmission Transparent to the userS-Video AudioBandwidth 20 Hz to 6 MHz 20 Hz to 20 kHzImpedance 75 ohms Source 100 Ω Max, Receiver 10 kΩ min.Max. Input 1.1 Vp-p 1.1 Vp-pInsertion Loss Less than 2 dB per pair dBover the frequency rangeLess than 2 dB per pairReturn Loss Better than 15 dB over thefrequency rangeN/ACommon ModeRejection RatioGreater than 40 dB over thefrequency range60 dB @ 1 kHz min.THD N/A Less then 0.007% @ 1 kHzMax. Distance:Cat 5e/6 UTP/STP1,000 ft (305 m) 3250 ft (1 km)Pin Configuration(RJ45)Reverse PolaritySensitiveLuma: Pins 7(R) & 8(T)Chroma: Pins 4(R) & 5(T)Audio 1: Pins 1(R) & 2(T)Audio 2: Pins 3(R) & 6(T)Cable:Cat 5e/6 UTP/STP24 AWG or lower solid copper twisted pair wireImpedance: 100 ohms at 1 MHzMaximum capacitance: 20 pf/ftAttenuation: 6.6 dB/1,000 ft at 1 MHzGround LoopIsolationIn the range of +/-50VDCConnectors One (1) 4-pin Mini DIN, two (2) RCA audio jacks and one (1) RJ45The 500018 comes with one (1) 6” dual-RCA stereo audio cableTemperature Operating: 0° to 55°CStorage: -20° to 85°CHumidity: Up to 95% non-condensingEnclosure Fire retardant plastic; blackDimensions 2.40” x 2.25” x 1.00” plus 6” Max. S-Video leadWeight 3.6 oz (103 g)Warranty LifetimeOrder Information 500018 S-Video/Audio GLI BalunS-Video/Audio Balun GLI – 500018Quick Installation GuideOverviewThe S-Video/ Audio GLI Balun allows one (1) S-Video channel and one (1) stereo line level analogaudio channel to be transmitted via unshielded twisted pair (UTP) cable in a point-to-pointconnection for more versatile cabling. The S-Video/Audio GLI Balun offers full ground loopisolation to help to eliminate hum-bars or other distortions related to ground loop. The balun isused in conjunction with other standard MuxLab S-Video products such as the 500016, 500017,500038 and 500200 in order to provide ground loop isolation for the system.ApplicationsThe S-Video/Audio GLI Balun is applied where ground loop issues may be present. Someapplications include home theatre systems, boardroom projector systems, classroom training andrental & staging.Caution: Do not attempt to open the housing. There are no user-serviceable parts inside theS-Video/Audio GLI Balun. Opening the unit may void your warranty.Note: In order to support the full 20Hz to 20KHz audio bandwidth, the baluns at both ends mustsupport 20Hz to 20KHz bandwidth. Please verify the balun’s specification table. Furthermore,only amplified speakers may be connected directly to the S-Video/Audio GLI Balun. Do notconnect 4 ~ 8 ohm speakers directly to the balun. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine