© MuxLab Inc.5450 Cote de Liesse, MontrealQuebec, Canada, H4P 1A5Tel.: (514) 905-0588Fax: (514) 905-0589Toll Free (N.Am): (877) 689-5228E-mail: videoease@muxlab.comURL: www.muxlab.com94-000xxx-A SE-000xxx-AVideoEase Digital Audio Balun (500020)Installation GuideIntroductionThe VideoEase Digital Audio Balun allows a digital audio source to be connected up to600 feet (183m) away from a digital audio decoder/amplifier via copper unshieldedtwisted pair (UTP) in a point-to-point scenario. Used in pairs, the Digital Audio Balunallows a Digital Audio source such as a DVD, VCR or satellite receiver to be connectedvia copper twisted pair to a Digital Audio home theatre system. The Digital AudioBalun connects directly to the digital audio equipment and features screw terminals andbuilt-in cable strain relief for ease of installation and reliable connectivity.InstallationTo install the VideoEase Digital Audio Baluns, perform the following steps:1. Identify the pin configuration of the baluns. One twisted pair is required.Although the Digital Audio Balun is not reverse polarity sensitive, however inthe event that there may be ground loop problems in a particular installation, itis recommended to ensure straight-through wiring (Ring to Ring, Tip to Tip).Digital Audio Balun (500020)Top View (cover off)RingTipRCA male RingTipTwisted pair cable1 pair