N-COM B601 & TOM TOM RIDER I1B601 AND TOM TOM RIDER IThe B601 system is compatible via Bluetooth with the TOM TOM RIDER I. After pairing up and connecting the navigatorto the N-Com system, you will be able to hear the signals coming from the Tom Tom in your helmet.For best results, it is recommended to download the latest available Firmware version of the satellite navigator and of theN-Com system.GENERAL INFORMATIONPAIRING UPFor the pairing up procedure between N-Com and navigator, please refer to the user manual of the N-Com system,chapter “Managing two mobile phones (or Bluetooth devices)”.N.B.: For proper management of the various devices, the navigator must always be paired up with the N-Com system asa SECONDARY DEVICE (please refer to the user manual of the N-Com system, chapter “Managing two mobile phones (orBluetooth devices”).CONNECTIONOnce the GPS has been paired up, connection takes place automatically upon switching on the B601 system.INDIVIDUAL USEThe navigator must be paired up and connected to the rider helmet only, following the instructions provided in the“General” section.GPS INDICATIONSAfter pairing up and connecting the navigator to the N-Com system, you will be able to hear the audio signals comingfrom the TOM TOM RIDER I in your helmet.MOBILE PHONEFor proper management of the various devices, the mobile phone must be paired up to the N-Com system as MAINDEVICE.For proper operation of all devices involved, it is recommended to NOT pair up and connect the mobile phone andnavigator one to the other.Incoming calls temporarily interrupt the connection with the navigator.MUSICFROM THE NAVIGATOR: Currently being tested.FROM THE MOBILE PHONE: Currently being tested.