NAPCO GEM-ACM1D Getting Started Manual

Also see for GEM-ACM1D: Installation instructions addendum Installation instructions

Contents

NAPCO GEM-ACM1D Getting Started Manual Manual pdf 1 page image

1GEM-ACM1DAccess Control AccessoryGetting Started GuideR333 Bayview AvenueAmityville, New York 11701For Sales and Repairs, (800) 645-9445For Technical Service, (800) 645-9440© NAPCO 2004 WI1324 9/04INTRODUCTIONThank you for purchasing NAPCO's new GEM-ACM1D Access Control Accessory. The GEM-ACM1D is anaccessory to the GEM-X255 that adds access control functionality to the GEM-X255 control panel. TheGEM-ACM1D provides controlled access to a door by releasing a magnetic lock or electric strike when aproper Prox Card is presented to the card reader.The GEM-ACM1D access control panel resides on the GEM-X255 system bus and uses a keypad location inthe system for communication. Like the keypad, the GEM-ACM1D can be used to arm and disarm the sys-tem, and is capable of controlling door access, monitoring door status and annunciating troubles and alarms.The GEM-ACM1D works with any standard Wiegand card reader and any UL 294 Listed door lock, however,the recommended reader is the HID Prox Point model 6005B-00. The NAPCO standard 36 bit proximity cardand the HID standard 26 bit proximity card formats are both supported.Up to 4 GEM-ACM1D modules may be connected to a GEM-X255 control panel. The GEM-ACM1D can sup-port up to two card readers using an optional plug-in GEM-2D module. Each card reader can be programmedto function independently on different doors.This Getting Started Guide will walk you through the following:1. Terminal Strip Descriptions2. GEM-2D Module for Second Door Installations3. ACM Programming4. Creating and Entering Proximity Cards5. Create an ACM Schedule6. Access Events LogsREQUIREMENTS• Gem-X255 control panel with v5 firmware or higher (circuit board with expanded RAM is required for aseparate ACM log capability).• PCD-Windows Quickloader Download software v4.5 or higher.TABLE OF CONTENTSINTRODUCTION ..................................................................................................................................................................................................1REQUIREMENTS .................................................................................................................................................................................................1HARDWARE DESCRIPTIONS .............................................................................................................................................................................2TERMINAL DESCRIPTIONS ................................................................................................................................................................................2GEM-2D MODULE FOR SECOND DOOR INSTALLATIONS ..............................................................................................................................4ACM PROGRAMMING .........................................................................................................................................................................................4CREATING AND ENTERING ACM PROXIMITY CARDS....................................................................................................................................................... 9CREATE AN ACM SCHEDULE ...............................................................................................................................................................................................10KEYFOB CONTROL OF ACM DOOR ACCESS....................................................................................................................................................................11FIRST MAN IN FEATURE ..................................................................................................................................................................................12WIRING DIAGRAMS ..........................................................................................................................................................................................15WARRANTY .......................................................................................................................................................................................................16