NEC 320LB EXP351E Getting Started Manual

Contents

NEC 320LB EXP351E Getting Started Manual Manual pdf 1 page image

GETTING STARTED! Follow these steps to become familiar with your serverdocumentation and to complete your installation successfully.1 Checking the Accessory BoxThe accessory box contains: Keys for the LOCKED front door** EXPRESSBUILDER bootable CD-ROM containing setup utilities,maintenance tools and system documentation. Customer Notices,* Alerts,* Software Notes,** and SystemRelease Notes Network Operating System (NOS) software** Application Software** Power cord(s), keyboard, and mouse ServerCare Guide containing the service and warranty information.*If required for your server.**On certain models.3 Installing Your Server Follow the Server Setting Up information in your User’s Guide tounpack and install your server. If your server includes Network Operating System software preloadedat the factory, it will boot-up to the operating system license agreementscreen. Follow the screen prompts and Software Notes to completeloading of your operating system. Options ordered with your server are already installed. If you haveadditional adapter boards and devices for your server, install thembefore putting the server in the location you have selected. Follow theprocedures in the Updating the System, Chapter 5 of the systemUser’s Guide, plus installation inserts and vendor documents that camewith the option.211212Display1000MbpsnetworkSCSIdevicebackup100MbpsnetworkUSB floppydisk driveReserved formaintenanceReserved formaintenanceKeyboardMouseTypical Server Connections4 Running the EXPRESSBUILDER CD-ROMNote: EXPRESSBUILDER does not support FT Linux installation. Boot the EXPRESSBUILDER CD-ROM to: Ensure correct hardware setup if you installed additional adapterboards or devices in Step 3. Prepare your server for operating system installation. Re-install Windows Server 2003 Enterprise Edition. Run EXPRESS5800 utilities independently of the operating system. Autorun the EXPRESSBUILDER CD-ROM under Windows to: Read/print documentation in your User’s Guide. Install ESMPRO, ExpressCluster SRE, or ManagementWorkstation Application (MWA) or make an OEM diskette.Note: If you received system diskettes with your server, thesediskettes provide the latest available system utilities information. Usethese diskettes instead of running the system utilities from theEXPRESSBUILDER CD-ROM.5 Installing Application Software Locate application software media and accompanying installationprocedures. Install application software following procedures in theapplicable installation guide. To enable self-recovery for your application, initialize and configurethe pre-installed NEC ExpressCluster SRE on the server according tothe Configuration chapter in the ExpressCluster SRE Installation andConfiguration Guide on the EXPRESSBUILDER CD-ROM. If your Network Administrator advises, install your server managementsoftware using the EXPRESSBUILDER CD-ROM.Your server installation is complete.Need More Help?Please call the Technical Support number in yourServerCare Guide.2 Your System Documentation You may view and print the User’s Guide and EXPRESSBUILDERUser’s Guide from the EXPRESSBUILDER CD-ROM. To do this, insertthe CD-ROM into the CD-ROM device on a system running aMicrosoft® Windows® Operating System with Internet Explorer 4.01 orlater installed. Do not boot from the EXPRESSBUILDER CD-ROM.Use the Adobe® Acrobat® PDF viewer to view and print thedocuments. If you do not have Adobe Acrobat PDF viewer, select“Install Adobe Acrobat Reader” on the CD-ROM to install the reader. Read the System Release Notes. The System Release Notes providethe latest available system information. Read the Software Notes. The Software Notes provide information onconfiguring and running software preloaded on your system. Read “Installing Windows 2003” in Chapter 3 of your User’s Guide,before installing your operating system.

/ 2

Related manuals for NEC 320LB EXP351E