AM1-002409-002August 2014Names and Functions of Partsh RESET switchb ACTIVE lamp(Communicationstatus display)c AIR lamp(Wireless communicationstatus display)a POWER lamp (Power)Strap holeStraps for mobile devices can be attached.e WAN port(WAN interface)f Power connectord WAN lampg SET buttona POWER lamp(Power)Green (illuminated) Power is onGreen (blinking) Setting using WPSOrange (illuminated)()Updating firmware versionWi-Fi setting using WPS is completedRed (illuminated) WPS failedRed (blinking) Preparing to resetWi-Fi setting using WPS failedOff Power is offb ACTIVE lamp(Communication statusdisplay)Green (illuminated) Internet communication is establishedOff Internet communication is not establishedc AIR lamp(Wireless communicationstatus display)Green (illuminated) Wireless communication (2.4 GHz) is availableGreen (blinking) Sending and receiving data wirelessly (2.4 GHz)Off Not using Wi-Fid WAN lamp Green (illuminated) Link with the WAN port is establishedGreen (blinking) The WAN port is communicatingOff Link with the WAN port is not establishede WAN port(WAN interface)Connection for LAN ports provided in hotel rooms.f Power connector Use to supply power DC5V (4.75V to 5.25V) 500mAMicro-USB type Bg SET button Use when setting WPSh RESET switch Use when resetting() The POWER lamp also illuminates in orange when automatically overwriting the firmware and setting information ofthis product. Do not turn off the power. Doing so may damage the product.English Support by the information center is provided only in Japanese. This product (including the software) is designed with Japanese specifi cations, and is not compliant with non-Japanese standards. NEC assumes noresponsibility for any use of this product outside Japan. NEC does not offer any overseas maintenance or technical support for this product. This guide provides the setup procedures in four languages. For the product specifi cations, cautions and other information that are not covered in this guide,please refer to the “Tsunagikata-Guide” (in Japanese) and “AtermStation” (in Japanese).a Using an Ethernet cable, connect the WANport of this product and a LAN port locatedwithin the hotel.LAN port providedin a hotel room WAN portWAN lampb Connect the power cable using one of the following methods and wait approximately 30 seconds.Supplying power from a computerUse the USB power cable supplied with this product.Power connectorSupplying power using an AC adapter An AC adapter is not supplied with this product. Use the separately sold NEC-specified AC adapter (product name: A3V9P1365/model number: AL1-003685), oran AC adapter whose operability has been verified. For information on how to purchase an NEC-specifi ed AC adapter, visit Shop@Aterm ( http://shop.aterm.jp/ ). For information about operability verifi cation, see the details of the verifi ed operability for the AC adapter in[PRODUCT] - [AtermW300P] in “AtermStation”. (As of October 2013) Use an AC 100V (50/60Hz) power source when using the AC adapter.Power outletPower connectorc Power and WAN lamps illuminate in green.POWER lampilluminates ingreenWAN lampilluminates in greenTurning on the power1Connecting to W300P with a Wi-Fi connection Aterm is a registered trademark of NEC Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Mac OS, OS X and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. The iPhone trademark is used under license from AIPHONE CO., LTD. “Android” is a trademarkor registered trademark of Google Inc. MEDIAS is a trademark or registered trademark of NEC CASIO Mobile Communications, Ltd. Other company names, product names, services names, etc., are trademarks or registered trademarks of their respective companies.© NEC Platforms, Ltd. 2013-2014 Reproduction, revision and distribution of copies are prohibited without the permission of NEC Platforms, Ltd.Set your wireless LAN device using the network name (SSID) and encryption key found on thebottom of this product to connect with a Wi-Fi connection.For Windows 8a Display the desktop screen.b Click the network icon on thebottom right of the screen.c Select the network name (SSID) of thisproduct and click [Connect].d Enter the encryption key (single-bytelowercase characters) of this product andclick [Next].For an iOS deviceThe following example is for iPhone runningiOS 6.1.a Tap [Settings].b Tap [Wi-Fi].c Set [Wi-Fi] to [ON] and tap the networkname (SSID) of this product.d Enter the encryption key (single-bytelowercase characters) of this product andtap [Join].For Mac OSThe following procedure is for OS X v10.8.a From the Apple menu, click [SystemPreferences...] - [Network].b Select [Wi-Fi].c Select the network name (SSID) of thisproduct.d Enter the encryption key (single-bytelowercase characters) of this product andclick [Join].For an Android deviceThe following example is for MEDIASrunning Android 4.2.a Tap [Settings].b Set [Wi-Fi] to [ON] and tap [Wi-Fi].c Tap the network name (SSID) of thisproduct.d Enter the encryption key (single-bytelowercase characters) of this product andtap [Connect].2Multi-language manualSetup Guide
