NEC Conference Max Getting Started Manual

NEC Conference Max Getting Started Manual Manual pdf 1 page image

To Connect NEC Conference Max1. Connect the Cat. 5 cable from the Link Out jack on the base unit to the Link Injack on the conferencing pod.2. Connect the base unit to the telephone jack using the RJ-11 telephone cable.3. Connect the power cord to the base unit and plug the power cord into anelectrical outlet.To Connect Additional Units1. Connect the 12' Cat. 5 cable to the Link Out jack on the first phone and theLink In jack on the second phone.2. Continue linking up to three additional NEC Conference Max phones in thesame fashion. A total of four units may be connected.C O N F E R E N C E P H O N E S E T U PGuideTo Access the Programming MenusPress and hold until appears on the LCD screen.Then press the key thatcorresponds with the desired menu option and follow the instructions below.P RO G R A M M I N G O P T I O N SNEC Conference MaxA u d i o C o n fe r e n c i n g*Press and hold the "1" key to enter a hyphen or the "*" key to enter a space in the number. If a number has alreadybeen programmed, use CLEAR to delete the old number before entering the new number.Ringer Melody 1Dialing Mode 2Flash Duration 3Local Number* 4Conference* 5Service* 6Key ProgrammingMenu Option1-5 to select a new melody. Press to save selection.Press . The current melody selection flashes. Press1 for tone, 2 for pulse. Press to save selection.Press . The current dialing selection flashes. PressPress . Enter the phone number that you want theConference key to dial. Press to save the number.duration. 1 = 600ms, 2 = 300ms, 3 = 150ms, 4 = 100ms, 5 = 80ms.Press . The current duration flashes. Press 1-5 to selectPress to save selection.appear on the LCD screen when the phone is in standby.Press . Enter the phone number that you want toPress to save selection.Press . Enter the phone number that you want the0 key to dial. Press to save the number.Country 7 Press . Press the number key that corresponds with thedesired country. 1 = US/Canada/China/Japan/Mexico/Singapore,2 = Europe CTR 21, 3 = Australia, 4 = S. Africa, 5 = Brazil, 6 = New Zealand,7 = South Korea. Press to save the country setting.Press CLEAR once to return to the previous menu level or hold to exit Programming modewithout saving changes.! CAUTION: Read the Safety Information in the user manual.25' Cat. 5 cableRJ-11telephonecableTo Link InTo Link OutRear of conferencing podRear of base unit12' Cat. 5 cableFrom Link OutTo Link InTo Link InTo Link Out on Base Unit25' Cat. 5 cable© 2005 . All rights reserved. No part of this document may be reproduced in any form or by any means without writtenpermission from NEC. NEC reserves specific privileges. Information in this document is subject to change without notice.NEC Conference Max is protected by U.S. Patent No. D499,392 Part No. 800-157-251 (Rev. BETA)

/ 2

Related manuals for NEC Conference Max