NEC Display Solutions of America, Inc.E321 Installation Guide32” LCD Display Rev 1.7www.necdisplay.com E321 Page 1 of 8Contents:Product Description and Notes Page 1Ventilation Requirements Page 2Display DimensionsFront, Top & Right Side Page 3Rear Page 4Display Dimensions with Stand Page 5Optional Wall Mount Dimensions (WMK-3260L) Page 6Optional Wall Mount Dimensions (WMK-3257) Page 7Input Panels Page 8Product Description:Type: LCD Display Screen Surface: Anti-ReflectiveResolution: 1366 x 768 Dimensions without stand: 30.8”(W) x 20.1”(H) x 3.7”(D)Aspect Ratio: 16:9 Dimensions with stand: 30.8”(W) x 22.0”(H) x 8.3”(D)FCC: Class B Weight without stand: 22.5 lbsPower Consumption: 150W (typ) Weight with stand: 24.9 lbsBTU’s: 511.82 BTU/hourNOTES:• This document is intended to be used as a reference guide to supply useful information for a design or installation. It is notintended to be a step-by step procedure for installation.• Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs.• This unit is built to sustain Landscape orientation only.• 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontallyto fill the screen using the menus (see “Aspect Modes” in menus and user manual).• Distances are in inches, for millimeters multiply by 25.4.• Distances may vary ±5%.