NEC MultiSync LCD4215 Installation Manual

Also see for LCD4215 - MultiSync - 42" LCD Flat Panel Display: Brochure Communications manual User manual User manual Specifications

Contents

NEC MultiSync LCD4215 Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.LCD4215 Installation Guide42” LCD Display Rev 1.0www.necdisplay.comContents:Product Description and Notes Page 1Tilt Angle and Rotation Page 1Ventilation Requirements Page 2Display DimensionsFront, Top & Right Side Page 3Rear & Bottom Page 4Display Dimensions w/Optional Speakers and Stand Page 5Table Top Stand Dimensions Page 6Optional Speaker Dimensions Page 7Dimensions optional Wall Mount Page 8Control Codes Page 9Product DescriptionType: LCD Display Screen Surface: Anti-ReflectiveResolution: 1366 x 768 Dimensions: 40.3”(W) x 24.2”(H) x 5.2”(D)Aspect Ratio: 16:9 Weight: 47.6 lbsFCC: Class BPower Consumption: 190W (max) BTU’s: 648 BTU/hourNotesThis document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended tobe a step-by step procedure for installation.Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs.4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally tofill the screen using the menus (see “Aspect Modes” in menus and user manual).Distances are in inches, for millimeters multiply by 25.4.Distances may vary ±5%.Tilt Angle and RotationBelow are the maximum angles that the monitor can be tilted in the landscape position only.Landscape 20degLCD4215 Page 1 of 9Max. 20 deg