NEC NP300 Installation Manual

Also see for NP300 Series: Control commands Command guide Command guide Specifications Quick setup guide

Contents

NEC NP300 Installation Manual Manual pdf 1 page image

NEC Display Solutions Europe GmbHNP300/NP400/NP500/NP600 Installation GuideCeiling Mounted and Desktop Rev 1.1www.nec-display-solutions.com NP300/400/500/600 Page 1 of 6ContentsProduct Description, Lens Specs, Notes and Formulas Pg 1Diagrams & Distance Charts Pg 2Cabinet Dimensions Pg 3-4Ceiling Mount Dimensions Pg 5Input Panel and Control Codes Pg 6Product DescriptionType: 3 panel LCD projector, Dimensions: 308 (W) x 93,5 (H) x 262 (D)0.63” p-Si TFT w/MLA Weight: 2,98 kgResolution: 1024 x 768 Brightness: NP300- 2200 LumensNP400 - 2600 LumensFan Noise: 35 dB / 29dB @ 1 meter NP500 - 3000 LumensNP600 - 3500 LumensPower Consumption: NP300/400/NP500 295W (max) BTU’s: 1007 BTU/hourNP600 325W (max)Lens SpecificationsThrow Ratio: 1.5 – 1.8:1 (for 100” diagonal) Focal Length: 19.8mm – 23.7mmOffset Angle: 8.0° - 9.6° (for 100” diagonal) F/#: 1.7 - 2.0Screen Sizes: 21” - 300” diagonal (4:3) Manual Focus/Manual ZoomNotes For screen sizes not indicated on the projection tables, use the formulas below.If the figures on the tables do not match the results of formulas, use the figures in the table.• All calculations are based on a 4:3 aspect ratio.• Distances may vary ±5%.FormulasThe Projection Formulas use the image width for calculation. For proper projection placement, determine the image widthfor the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for “W” inthe Projection Formulas.Refer to the diagrams and charts for popular screen sizes on page 2:Definitions: 4:3 Screen Formulas:W = Image Width W = H x 4/3H = Image Height (size) H = W x 3/4B = Vertical distance between lens center and screen center Screen Diagonal = W x 5/4C = Throw distanceD = Vertical distance between lens center and screen top(screen bottom for desktop application)Projection Formulas:B = 0.258WC (wide) = 1.539W – 1.176C (tele) = 1.852W – 1.173D = 0.118Wα (wide) = tan¯¹ (B/C(wide))α (tele) = tan¯¹ (B/C(tele))