NEC NP3250W - WXGA LCD Projector Manual

Also see for NP3250W WXGA: Control commands Supplementary guide Technical data sheet Installation and assembly Installation and assembly

Contents

NEC NP3250W - WXGA LCD Projector Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.NP3250W Installation GuideDesktop and Ceiling Mount v 2.1www.necdisplay.com NP3250W Page 1 of 10ContentsProduct Description, Lens Specs, Screen/Aspect RatioNotes and Formulas Pg 1Distance Charts; 16:10 on 16:10 screen Pg 216:10 on 16:9 screen Pg 34:3 on 16:9 screen Pg 4Installation Diagrams Pg 5Lens Shift Adjustable Range Pg 6Cabinet Dimensions Pg 7Lens Dimensions Pg 8Ceiling Mount Dimensions Pg 9Input Panel and Control Codes Pg 10Product DescriptionType: 3 panel LCD projector, Dimensions: 15.7”(W) x 5.9”(H) x 14.1”(D)0.74 p-Si TFT w/MLA Weight: 16.1 lbsResolution: 1280 x 800 (16:10) / 1067 x 800 (4:3) Brightness: NP3250W – 4000 LumensFan Noise: 38 dB / 31dB @ 1 meterPower Consumption: 490W (max) BTU’s: 1672 BTU/hourNetwork Ready, integrated wired and wireless adapter Manual: Lens Shift, Horizontal & Vertical /Zoom/ FocusLens SpecificationsNP01FL: Throw Ratio: ~ 0.8:1 Focal Length: 13.2mmScreen Sizes: 38”-143” F/#:2.3NP02ZL: Throw Ratio: 1.18 - 1.54:1 Focal Length: 19.42 - 25.26mmScreen Sizes: 29” - 476” F/#:2.2Standard: Throw Ratio: 1.5 - 2.0:1 Focal Length: 24.4 - 32.5mmScreen Sizes: 29” – 476 ” F/#:1.7NP03ZL: Throw Ratio: 1.94 - 3.07:1 Focal Length: 31.6 – 50.2mmScreen Sizes: 38” - 476” F/#:2.2NP04ZL: Throw Ratio: 2.98 -4.77:1 Focal Length: 48.8 - 77.6mmScreen Sizes: 57” - 476” F/#:2.2NP05ZL: Throw Ratio: 4.62 - 7.02:1 Focal Length: 76.6 - 116.5mmScreen Sizes: 57” - 476” F/#:2.2Screen/Aspect Ratio16:10, 16:9 and 4:3 screens are fully supported with proper aspect ratio control for both type sources using NEC developedscaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.Notes For screen sizes not indicated on the projection tables, use the formulas below.If the figures on the tables do not match the results of formulas, use the figures in the table. All calculations are based on 16:10 aspect ratio. Distances are in inches, for millimeters multiply by 25.4. Distances may vary 5%.