NEC P50XC10 Installation Manual

Also see for P50XC10: Brochure User manual Release note Specifications Installation guide

Contents

NEC P50XC10 Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.P50XC10 Installation Guide50” Plasma Monitor Rev 1.2www.necdisplay.comContents:Product Description and Notes Page 1Tilt Angle and Rotation Page 1Ventilation Requirements Page 2Display DimensionsFront, Top, Bottom & Right Side Page 3Rear Page 4Cosmetic Colors Page 4Display Dimensions w/Optional Speakers and Stand Page 5Optional Stand Dimensions Page 6Optional Speaker Dimensions Page 7Dimensions w/Optional Wall Mount Page 8Connections Page 9Control Codes Page 10Product DescriptionType: Plasma Monitor Screen Surface: Anti-ReflectiveResolution: 1366x768 Dimensions: 48.07”(W) x 29.44”(H) x 5.10”(D)Aspect Ratio: 16:9 Weight: 108.0 lbsFCC: Class BNotesThis document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended tobe a step-by step procedure for installation.Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs.4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally tofill the screen using the menus (see “Aspect Modes” in menus and user manual).Distances are in inches, for millimeters multiply by 25.4.Distances may vary ±5%.Tilt Angle and RotationBelow are the maximum angles that the monitor can be tilted in the landscape position only.Do not install in the portrait position.Landscape 20degP50XC10 Page 1 of 10Max. 20 deg