NEC V463-TM Installation Manual

Also see for MultiSync V463-TM: User manual User manual

Contents

NEC V463-TM Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.V463-TM Installation Guide46” LCD Display Rev 1.0www.necdisplay.com V463-TM Page 1 of 10ContentsProduct Description and Notes Page 1Tilt Angle and Rotation Page 1Ventilation Recommendations, Touch Driver Setup Page 2Display DimensionsFront, Top, Right, Left, Bottom Page 3Rear Page 4With stand Page 5Table Top Stand Dimensions Page 6Optional Speaker Dimensions Page 7Optional Speaker Dimensions Page 8Optional Wall Mount Dimensions (WMK-3255S) Page 9Input Panel, Control Codes Page 10Product DescriptionType: LCD Display Screen Surface: Anti-Reflective Protective GlassResolution: 1920 x 1080 Dimensions without stand: 43.1”(W) x 25.6”(H) x 3.2”(D)Aspect Ratio: 16:9 Dimensions with stand: 43.1”(W) x 27.0”(H) x 13.8”(D)FCC: Class B Weight without stand: 62.0 lbsPower Consumption: 85W (typ) Weight with stand: 66.1 lbsBTU’s: 290.03 BTU/hour (typical)NOTES: This document is intended to be used as a reference guide to supply useful information for a design or installation. It is notintended to be a step-by step procedure for installation. Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs. 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontallyto fill the screen using the menus (see “Aspect Modes” in menus and user manual). Distances are in inches, for millimeters multiply by 25.4. Distances may vary ±5%.Tilt Angle and RotationBelow are the maximum angles that the monitor can be tilted in either landscape or portrait orientation.CLOCKWISE ROTATION ONLY MAXIMUM TILT ANGLE