FL4 Quick Start GuideRevision A0Thanks for your NIX labs purchase! For the full user’s guide, visit nixlabs.com.au/support.This product is not a toy and should be handled with care. Do no insert objectsinto the gaps in the enclosure. Do not press on the LED filaments as they arenot flexible. Consult the full manual for complete usage instructions.Getting StartedCheck the box for the following items and remove them from their packaging:• FL4 filament clock• Australian power adaptor (or Multi-Region adaptor for international orders)For use in countries other than Australia, remove the AU plug from the power adaptor,and replace with the correct one for your region (US, EU or UK).Plug the power adaptor’s USB-C end into the socket on the back of your clock either wayaround. Connect the power adaptor to the wall outlet and turn on - your clock will show88:88 for a few seconds after which it is ready to use.When powering from a computer, connect directly to the computer’s USB port – avoidUSB hubs or extension cables. You can use any good-quality charge & data USB-C toregular USB-A or USB-C to USB-C cable to connect your clock to your computer orphone/tablet.