NOZE GS529 User Manual
  |
SMOKE ALARMPHOTOELECTRICNOZEUSER MANUALThank you for purchasing our smoke alarm!Please read these instructions carefully and keep them in a safe place where you canaccess them easily.GS529 QUALITYFault warning modeWhen the smoke sensor is not functioning properly, it will turn into the fault warning mode. The sound of “BI” will occur between the flashes of the LED indicator light.Try cleaning the smoke alarm as per recommendation in maintenance section or contact NOZE representative for assistance.Maintenance In addition to monthly testing, clean the smoke alarm at least once a year to remove dust, dirt or debris. Use a vacuum cleaner with a soft brush, vacuum all sidesand covers of smoke alarm.IMPORTANT: Do not attempt to remove the cover to clean inside. This will void the warranty.Trouble shootingIMPORTANT: DO NOT disconnect battery to quiet an unwanted alarm. This will remove your protection. Please refer above “Trouble Shooting” section for a solution.Warranty Company warrants to the original consumer. Purchase each new smoke alarm to be free from defects in material and workmanship under normal use and servicefor a period from the date of purchase as per NOZE terms and conditions. This warranty does not cover damage (which also including any damage to the warrantysticker) resulting from accident, misuse or disassembly or abuse or lack of reasonable care of the product. In no case shall company be liable for any incidental orconsequential damages for breach of this or any other warranty express or implied, whatsoever. If after reviewing this manual you feel that your smoke alarm is defective in any way, do not tamper with the unit, contact NOZE representative for assistance.Problem Cause and RemedySmoke alarm does not sound when tested 1. Clean smoke alarm as per maintenance section.2. If situation persist, please contact NOZE representative.Smoke alarm beeps with the LED flashing about once every 40 seconds The battery is depleted, please refer “Low battery mode” section to replace the battery.Smoke alarm beeps between the LED flashing about once every40 secondsSmoke alarm is in fault warning mode, please:1. Clean smoke alarm as per maintenance section.2. If situation persist, please contact NOZE representative.Smoke alarm sounds different from it is used to be 1. Clean smoke alarm as per maintenance section.2. If situation persist, please contact NOZE representative.Smoke alarm sounds unwanted alarms intermittently or when residents arecooking, taking very hot showers, smoking…etc.1. Press test button to silence the alarm.2. Fan the air or open a window to remove smoke or steam.3. Clean smoke alarm as per maintenance section.4. If situation persist, please contact NOZE representative for recommendation.Overview visual & acoustic signalsOperating mode Visual signal (flash) Acoustic signal (beep) Description modeNormal 1 x per 40 seconds None Device is functioning properlySelf-Test 1 x per second (x3) / pause of 1.5seconds (when pressing the testbutton)1 x per second (x3) / pause of 1.5seconds (when pressing the testbutton)Device is testingAlarm 1 x per second (x3) / pause of 1.5seconds1 x per second (x3) / pause of 1.5secondsDevice is detecting smokeAlarm silence 1 x per 8 seconds None Smoke alarm signal is silencedLow battery warning silence None None Low battery warning is silencedSensor fault warning 1 x per 40 seconds 1 x per 40 seconds (between flashing) Sensor is not functioning properlyLow battery warning 1 x per 40 seconds 1 x per 40 seconds Battery is running low®2021 by Protect International Holdings Limited. All rights reserved. Unauthorized use ofthis document is strictly prohibited.We try to keep our product information up-to-date and accurate.We cannot cover all specific applications or anticipate all requirements.All specifications are subject to change without notice.IdentificationProduct type: Smoke AlarmItem number: GS529Manufacturer: Siterwell Electronics Co., LimitedDistributor: Protect International Holdings LimitedProduct Website: www.noze.techQuick Installation Guide:Scan the QR Code to get installation guideDocument No.: GS529_ManualRevision A: 210913- 4 - - 5 - |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine